As the heading says.. I have spent the last 40 min trying to find a post I know exists on setting up the 20B twin non sequentially.

If anyone can point me to the right link or website, or has first hand experience please let me know.

Thanks

Andrew

 

Use the instructions for the FD as a guide line. It is not difficult.

 

http://www.fd3s.net/non-sequential.html <- help you get started.

 

Thanks for the links guys

Has anyone done this themselves? Or been in a 20B that is running the twins non sequentially?

 

The stock twins are really a waste of time.
If you take the effort to install a 20B, you might as well at least for big single...


-Ted

 

The car is being used as a daily driver. I was thinking the twins non sequentially for one to keep costs down, use existing manifolds, no need to buy another wastegate. And the fact that on one of the posts that I read months ago (that I can't find) they were making around 400 rwhp, which is more than enough in a daily 1150 kg car.

So, if anyone has done it, or has any usefull opinions, please let me know.

RETed: Do you have any first hand experience of twins running non sequentially on a 20B?

 

I'ave done it,and I'm getting 397RHP, but I'm also runing a mirotech,link knock display,etc, if you woul like photos of this feel free to E-mail at discotec@clear.net.nz