Hey,
If there is a good thread of this already, I apologize for not doing an adequate enough search.

Anyway, I know the stock water temp and oil pressure gauges are problematic in their function. Has anyone done a gauge change out in the stock gauge shroud with the ability to keep a reasonable stock look. To go one step farther, how about a complete gauge change out while keeping the stock shroud. To my measurements, the fuel level, oil pressure, and water temp are right around 2 inches(50mm) and the tack is 4 inches and the speedometer is 3 and 1/2 inches. Anyone with a good change out of all 5? I'm also looking to do a boost gauge and EGT on the A pillar in dual pods and a fuel pressure and A:F ratio in a center channel dual pod. Would love to have a gauge company with all of these matching ideally. Give me a yell on this thread or aaronlaurie@comcast.net.

Thanks,
Aaron

 

I'm not at my computer right now otherwise I'd post the pic. But there is a blue FC with Autometer gauges in the stock locations. So it's do-able.

 

Here you go. I knew I had it.

 

1, 2, or 3 gen? i have some nice ones that i know of for 3rd

 

That's an FC.

 

i know the picture is an FC, i was asking the guy who started this thread if thats what he was talking about. there wasnt a car in his garage so i wasn't sure

 

Ah.

 

I'm wondering about a 3rd gen. I have a greddy boost now in white face and am thinking of sticking with the theme for the oil pressure, water temp, EGT, fuel pressure. Wondering, though, if there are any companies out there that could do the works, boost,EGT,A:F,fuel pressure, water temp, oil pressure, tach, and speedometer.

Aaron