Flaco Racing: New 20B & turbo combo - 6:79@*209*
Originally Posted by Bern
Guys,
Just wanted to let you know that Abel ran a clean 6:79 @ 209 mph tonight in qualifying at the Las Vegas NHRA Sport Compact qualifier. A small tire shake hurt overall ET. We'll be running elminations tomorrow (Saturday) and hope to improve on this performance.
This is the firt time we've been able to run our new turbo and engine combo (no testing at all). We are happy with the new found power, reflected in the improved Mile-an-Hour. There is a very conservative tune on the car, and boost was kept moderate.
Hope to have better news tomorrow. Wish us luck... It's hard work to keep up with those piston boys!
-Bern
Just wanted to let you know that Abel ran a clean 6:79 @ 209 mph tonight in qualifying at the Las Vegas NHRA Sport Compact qualifier. A small tire shake hurt overall ET. We'll be running elminations tomorrow (Saturday) and hope to improve on this performance.
This is the firt time we've been able to run our new turbo and engine combo (no testing at all). We are happy with the new found power, reflected in the improved Mile-an-Hour. There is a very conservative tune on the car, and boost was kept moderate.
Hope to have better news tomorrow. Wish us luck... It's hard work to keep up with those piston boys!
-Bern
All BS aside, I am truely happy for you guys
; those are some AWESOME numbers 
Thread Starter
Rotary Enthusiast
Joined: Mar 2001
Posts: 1,414
Likes: 0
From: Southern Cali
Originally Posted by KNONFS
Bern,
All BS aside, I am truely happy for you guys ; those are some AWESOME numbers
All BS aside, I am truely happy for you guys
; those are some AWESOME numbers
Originally Posted by enzo250
Congrats ABEL... That was a sick run... I was standing about 25
ft away from the car on that pass. It was sick....
ft away from the car on that pass. It was sick....
-Bern
Thread Starter
Rotary Enthusiast
Joined: Mar 2001
Posts: 1,414
Likes: 0
From: Southern Cali
Originally Posted by enzo250
You know the englishtown event in oct is the best race of the year. You gotta make it.
-Bern
Thread Starter
Rotary Enthusiast
Joined: Mar 2001
Posts: 1,414
Likes: 0
From: Southern Cali
Originally Posted by riceburner1r2001
...and take it too the streets again
-Bern
InsaneRotaries.com
Joined: Feb 2002
Posts: 2,748
Likes: 0
From: Westchester, NY
i think he had alot of tire shake during qualifing...his quickest was a 8.3's @198...i dont remember him losing a motor, but i was in his pit area while they was warming up the car and at 6feet away from the turbo when that 2step kicks in its freeking amazing....the exhaust pulses was so strong, i think it probably hits u harder than the 2jz cars ...does anyone have any info on his ignition/ 2step setup??
Originally Posted by RoTaRyBoYz
i think he had alot of tire shake during qualifing...his quickest was a 8.3's @198...i dont remember him losing a motor, but i was in his pit area while they was warming up the car and at 6feet away from the turbo when that 2step kicks in its freeking amazing....the exhaust pulses was so strong, i think it probably hits u harder than the 2jz cars ...does anyone have any info on his ignition/ 2step setup??
The Flaco Racing RX-8 uses the following:
2 - MSD DIS 4 ignitions
6 - MSD H.O. coils (1 per plug)
all run with a custom MSD interface box to the MOTEC M880
We find it enough!
-Bern
Flaco Racing
Thread Starter
Rotary Enthusiast
Joined: Mar 2001
Posts: 1,414
Likes: 0
From: Southern Cali
Originally Posted by 13btnos
http://ausrotary.dntinternet.com/for...746&highlight=
The Flaco Racing RX-8 uses the following:
2 - MSD DIS 4 ignitions
6 - MSD H.O. coils (1 per plug)
all run with a custom MSD interface box to the MOTEC M880
We find it enough!
-Bern
Flaco Racing
The Flaco Racing RX-8 uses the following:
2 - MSD DIS 4 ignitions
6 - MSD H.O. coils (1 per plug)
all run with a custom MSD interface box to the MOTEC M880
We find it enough!
-Bern
Flaco Racing
-Bern
InsaneRotaries.com
Joined: Feb 2002
Posts: 2,748
Likes: 0
From: Westchester, NY
wow, do you work in a grave yard????
Back from the dead
Still a very interesting thread... Look at where rotary performance was back in '05, it's pretty amazing even by today's standards
Back from the dead
Still a very interesting thread... Look at where rotary performance was back in '05, it's pretty amazing even by today's standards
Wow, are you actually giving Abel props? What other rotary was running 6's back then?.................
Full Member
Joined: Aug 2007
Posts: 61
Likes: 0
From: On The Two Step
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
3rd Generation Specific (1993-2002)
5
Jan 11, 2016 04:08 PM
Turblown
Vendor Classifieds
0
Aug 18, 2015 10:01 PM
