I am having a little problem, I did a mock tranny fitment onto my 20b and only 3 bolt holes match'd up, tha's not good it is? Has anyone else had this problem? I have a 98 tranny that I got from www.rotaryworks.com . Any advice is greatly appriciate'd

 

I think only 3 or 4 bolts matched on my 20b and 88 tranny. I don't think thats to good either, but there are people out tthere running like this and don't seem to be having any trouble with it.
Could weld some ears onto the bellhousing and drill/ machine them out to match a couple on the rear housing maybe.

 

how many are there supposed to be? 7? i think i'm missing 2, so i think i have 5*

mike

*dangerously close to math, accuracy is not garonteed

 

I think there are 5 also, I talk'd to Tito @ alamorotary and he said that they should all match except 1 @ the top of the bell housing, so I will retry to see if I just had it angle'd wrong

 

ive got 4500miles on mine with no problems. i'm not going for huge power though.

mike

 

Mine all match except 1 at the top - Im using a series 5 box.