3 Rotor Conversion Kit from MVA - Part 2
04-13-03, 08:11 AM
#26
Senior Member
Join Date: Jun 2002
Location: US
Posts: 357
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by vosko
sorry to hear it mike
sorry to hear it mike
That is why I never dealt with him when I took my car to MVA. I knew from the beginning that he was a shady person to deal with. Mike I believe Marcos has lead you in the right the direction regarding your project. Take their advise. I am not an MVA employee, just a very happy customer and now a friend as well. They mean well and will help you.
Mario
04-14-03, 05:17 PM
#29
Senior Member
Join Date: Jul 2001
Location: Columbus, Ohio
Posts: 585
Likes: 0
Received 0 Likes
on
0 Posts
This thread and the developments of this car is one of the main reasons I have been continually checking this section. I'm sorry that some low-life **** for brains has put a large damper on the project. Damn that pisses me off. 
04-15-03, 03:33 PM
#30
Junior Member
Join Date: Mar 2003
Location: jersey
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
the "spokesman" for mva motorsports (mario)
is such an honest person that he with the help of the acostas took advantage of a customer with a very clean,clean titled 3rd gen.the vehicle kept blowing up on the kid time and time again after mva tuned it.so the kid was frustrated and mario conned him into trading for a theft recovery supra wich he neglected to inform the kid was salvage.the kid went under the advice of not only mario but also marcos jr. wich told him a ridiculousamount to repair the vehicle and also told him he was better off in the supra.in conclusion i ask only one question why didnt mario take the car to a motor vehicle inspection to clean the title when he had all the parts to do so?????were they in fact stolen parts ????
is such an honest person that he with the help of the acostas took advantage of a customer with a very clean,clean titled 3rd gen.the vehicle kept blowing up on the kid time and time again after mva tuned it.so the kid was frustrated and mario conned him into trading for a theft recovery supra wich he neglected to inform the kid was salvage.the kid went under the advice of not only mario but also marcos jr. wich told him a ridiculousamount to repair the vehicle and also told him he was better off in the supra.in conclusion i ask only one question why didnt mario take the car to a motor vehicle inspection to clean the title when he had all the parts to do so?????were they in fact stolen parts ????
04-17-03, 10:47 AM
#33
Full Member
Join Date: Dec 2001
Location: So. Cal
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
Refocus
Ok let's get back to basics. I was wondering with this type of HP and larger engine has anyone considered getting a larger fuel cell and if so which one?
3 Rotor Conversion KIt!!!
Ok, listen up guys ,, for this month and the next one only. I have decided to put a special on 3 rotor convertion. The 3 rotor convertion will cost $35,000. This will include the following.
1. 3 Rotor engine
2. Port Polished Engine
3. 3mm Rotors and apex seal
4. Dual Ball Bearing Turbo (single)
5. Front Mount Intercooler
6. Injectors
7. 2 Bosh fuel pump
8. Stainless Steal Turbo Manifold
9. Billet Intake Manifold
10. Billet Oil Pan
11. Microtech ECU
12. Bosh Coils
13. Billet Fuel Rails
14. Fuel Regulator
15. HKS Wastegate
16. BLow Off Valve
17. Intercooler Piping Alum ,(polished)
18. Down Pipe
20. Cat Back Muffer System
21. Everything Install & dyno tune
22. Clutch / Flywheel
23. Boost / Air fuel Gauge
24. Dual Stage Boost Control
Everything Is Install !!!
3 Rotor Conversion KIt!!!
Ok, listen up guys ,, for this month and the next one only. I have decided to put a special on 3 rotor convertion. The 3 rotor convertion will cost $35,000. This will include the following.
1. 3 Rotor engine
2. Port Polished Engine
3. 3mm Rotors and apex seal
4. Dual Ball Bearing Turbo (single)
5. Front Mount Intercooler
6. Injectors
7. 2 Bosh fuel pump
8. Stainless Steal Turbo Manifold
9. Billet Intake Manifold
10. Billet Oil Pan
11. Microtech ECU
12. Bosh Coils
13. Billet Fuel Rails
14. Fuel Regulator
15. HKS Wastegate
16. BLow Off Valve
17. Intercooler Piping Alum ,(polished)
18. Down Pipe
20. Cat Back Muffer System
21. Everything Install & dyno tune
22. Clutch / Flywheel
23. Boost / Air fuel Gauge
24. Dual Stage Boost Control
Everything Is Install !!!
04-21-03, 09:36 PM
#40
Photo Diety
Join Date: Mar 2001
Location: Florida
Posts: 2,311
Likes: 0
Received 0 Likes
on
0 Posts
Hey Vosko, tell Judge I said hi...I guess he knows some peeps down here in Naples! Small world. Tell him I managed NOT to screw up the Cosmo housing he sent me :-) Engine is looking good. Just need to get it put together this week and slide her into the car. I polished EVERYTHING.
Looks like my 3 rotor project is now heading in a different direction...anywhere but NJ. Pretty sad.
Out of curiosity, why is it that EVERYONE charges $35K? Realistically, with a 'Pettit" style installation, you're looking at less than half that in parts. And there's NO WAY the installation runs $15-20K.
Mike, I really hope things work out for you. I'm sure you've already contacted a lawyer. Make sure he's able to practice in the Garden State. Regardless of how amicable everyone seems to be, it'd still be a good idea to spend $500 on a retainer. Just a thought.
Looks like my 3 rotor project is now heading in a different direction...anywhere but NJ. Pretty sad.
Out of curiosity, why is it that EVERYONE charges $35K? Realistically, with a 'Pettit" style installation, you're looking at less than half that in parts. And there's NO WAY the installation runs $15-20K.
Mike, I really hope things work out for you. I'm sure you've already contacted a lawyer. Make sure he's able to practice in the Garden State. Regardless of how amicable everyone seems to be, it'd still be a good idea to spend $500 on a retainer. Just a thought.
04-22-03, 04:48 PM
#43
Administrative Me
Thread Starter
Join Date: Feb 2001
Location: Kansas
Posts: 1,370
Likes: 0
Received 0 Likes
on
0 Posts
... Give it some time and lets see how it works out.
MVA want's to finish my car. That has never been in question, but being stuck between a business fued between two parterns who are not willing to give; is where I am.
We are trying to get it done, but before all the mud slinging comes out lets see how it goes.
Mike
MVA want's to finish my car. That has never been in question, but being stuck between a business fued between two parterns who are not willing to give; is where I am.
We are trying to get it done, but before all the mud slinging comes out lets see how it goes.
Mike
04-25-03, 03:20 AM
#45
Administrative Me
Thread Starter
Join Date: Feb 2001
Location: Kansas
Posts: 1,370
Likes: 0
Received 0 Likes
on
0 Posts
grrr.....
In all fun and spirits, I can see the joking.. But please, in an all serious note; that ISN'T funny...
You never know what could walk away.
In all fun and spirits, I can see the joking.. But please, in an all serious note; that ISN'T funny...
You never know what could walk away.
04-25-03, 07:57 AM
#46
Junior Member
Join Date: Feb 2001
Location: Central FL
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Hey Mike,
What mailing address do you have for me? I still haven't gotten anything. :-( Can ya PM me what you have? I'm thinkin you may have the wrong info or somethin...
Thanks!
Jose
What mailing address do you have for me? I still haven't gotten anything. :-( Can ya PM me what you have? I'm thinkin you may have the wrong info or somethin...
Thanks!
Jose
04-25-03, 07:00 PM
#47
Rebreaking things
Join Date: Jun 2001
Location: 1 foot in Boston 1 in NJ
Posts: 2,586
Likes: 0
Received 0 Likes
on
0 Posts
I hope you're getting a price break for this. Time is money 
That said, they seem like nice guys so that calls for a bit of leeway-weeks not months.
That said, they seem like nice guys so that calls for a bit of leeway-weeks not months.
