Hey guys I really need a Throttle body inlet pipe. I would rather buy the factory one instead of fabricating one. If anyone could help me out that would be great.
Thanks,
Usfdr

 

I may have one from my Cosmo 2 rotor...not sure if it's exactly the same?

 

I'm willing to accept the risk. how much do you want for it including shipping to Tampa, Fl 33647

Thanks,
usfdr

 

its the same for 13b and 20b

mike

 

Despite appearing the same. There is actually a slight difference in the bore diameters of the two throttle bodies.

Naturally, the 20B being the larger of the two.

I think from memory, the primary ports are the same size & its the secondaries that are larger for the 20B version

 

With the tb's I have heard conflicting reports on which is bigger (20b vs 13bre) or better for the 20b. Would someone that has both just mic them already and let us know for sure?

 

the elbows are the same though

mike

 

Someone just sell me one. Please!

usfdr

 

I thought Kurgan had a spare one that was in "new" condition... PM him to see

 

How long can you wait? I may have one to sell soon.

 

Well, I have to wait as long as it takes to get one but I'm doing the intercooler piping now so I really need it ASAP.

Thanks,
usfdr

 

You may just want to make your own. The Cosmo elbow just misses clearing the hood of an FC, and the shape doesn't lend itself well to the required plumbing for most FC's.

 

Well, I'm not going to use that much of it at all. Just the part that connects to the TB till it tapers down to about 2.5" should only be using about 6" of it. It would cost me more to make one than to jsut buy one and cut out what I need.

UsfDr