cptpain

iTrader: (1)

ive sold my -SE's engine harness to friend of mine who lives in FL.... the thing i need to know is how to remove the wiring through the firewall without breaking anything ...ive searched the forum for: ecu, ecu removal, fb wiring harness, wiring harness removal and all but to no avail.... plus it wouldnt hurt to know where the ecu is sitting at since he might also want that.

p.s. pictures will be very helpful

Hades12

I just unpluged all the plugs and pulled from the inside, it came out without any problems

rotor vs. piston

Yep... same here. Just pop out the big *** gromet (I don't know why, but I love the word gromet) and everything feeds though easily.

cptpain

iTrader: (1)

ok then thanks...so where is the ecu mounted? under the dash or behind it (behind the glove box)?

rotor vs. piston

Should be under a plate in the passenger foot well, you have to pull back the carpet to get to it.

cptpain

iTrader: (1)

not a problem as the interior(everything...dash, carpet, seats etc.) of my -SE parts car(grey) is going to be transferred to my other -SE(red/burgundy) as it just looks worn out and faded. plus it will match the "charcoal grey" or "Tornado Silver" paint... i appreciate the help guys!

Hades12

It is odd the way it is in the foot well but it is there bolted to the floor.

cptpain

iTrader: (1)

i see

Midwest 7's

iTrader: (4)

it helps to have a buddy pull the harness through as you wrangle the plugs when getting it through the hole in the firewall.