Wipers
#1
Full Member
Thread Starter
Join Date: Jan 2004
Location: gatineau, Quebec, canada
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
Wipers
Hi everyone, I just bought a 1985 Rx-7 (GSL). I'm getting her ready for a (Quebec) safety. When I put on the wipers they work, however just "one speed". When I turn them off, the wipers stop halfway on the winshield, instead of going all of the way back down. I noticed under the steering column, where the wiper wiring is, a Blue wire cut in half, so I taped back them together then retried the wipers. Now the wipers are working and have three speeds" like she suppose to have, however, the damn wipers wont turn off.
Can someone help me on this. All help is appreciated.
regards
Pete
Posted also on Cnd site.
Can someone help me on this. All help is appreciated.
regards
Pete
Posted also on Cnd site.
#2
Heck Yes!
Join Date: Apr 2003
Location: Chatham, Ontario, Canada
Posts: 1,075
Likes: 0
Received 0 Likes
on
0 Posts
It may be possible that there some sort of relay missing in there.
take a look at the Factory service manual
Here: http://www.wankel.net/~krwright/cars/rx7/85_manual.html
or a Hayns manual to check the wireing.
I would say that it sounds like you are missing a part or the combo switch has gone bad.
Good luck,
A
take a look at the Factory service manual
Here: http://www.wankel.net/~krwright/cars/rx7/85_manual.html
or a Hayns manual to check the wireing.
I would say that it sounds like you are missing a part or the combo switch has gone bad.
Good luck,
A
Thread
Thread Starter
Forum
Replies
Last Post