My passenger window keeps coming off the track when its rolled down, and when Its on the track I have to pull one corner up to get it to close all the way. I took the **** off so people will stop rolling it down, but I want it fixed.

The track seems to be in the right place, and doesn't move. To get it back on I have to roll the window down pull it into the track and roll it back up. Its a manual window by the way.

 

Here is one thread on the subject, others can be found by entering the search term(s) window regulator.

https://www.rx7club.com/showthread.p...ndow+regulator


Also would be a good idea for you to download a copy of your year FSM as it really has all of the repair procedures.

http://foxed.ca/foxed/index.php?page=rx7manual

 

Thanks, I did search but wasn't finding what I was looking for. I didnt think the service manual would have that, but I'll take a look

 

I have mine adjusted as tight as I can and it still would come off. What I did was put a bit of jigaloo spray in the channel. It drys clear and will keep it lubricated for quite a while. Mine have run great ever since.

 

Thats not a bad idea, I'll have to try that. The passenger window in both my FB's comes off, very annoying....