they are off a 2nd gen my uncle found at a junkyard, he could only get the 4 wheels before they crushed it. what will they fit?

 

They will fit the SE. I'm getting a set for my SE.

 

what year car did these come off, i thought 2nd gens were the 5 bolt pattern. are the off the aniversary editiohn?

 

ewwwww...they are 2nd gen phone dial style rims...the worst ones they offered for stock 2nd gens...

but yea...i thought all 2nd gens were 5 bolt pattern also...but maybe the verts werent?

 

i dunno what will look better, phone dial ones or my stock se ones

 

The lower end models had 4 bolt (atleast the S4s, not sure about S5s). The 5 bolt had larger rotors and 4 piston calipers (instead of the single piston caliper). And yes, the bolt pattern is the same as the SE.

Kent

 

all verts came BBS wheels, i think base FC's have 4 lug

 

The 4 bolt wheels from the 2nd gen cars have a 4 1/2 inch bolt circle, same as the GSL-SE, but I am not sure about the offset. Have any of you actually installed them on a GSL-SE?? I am thinking the wheels you bought may have too much offset, and may interfere with the spring perch on the strut.

I converted to the 5 bolt hubs and brakes on my GSL, and had to use a 1 1/4 inch spacer to get the proper offset for the BBS alloys from a 1990 convertible.

www.cardomain.com/ride/646433

 

its been done

 

Check this pic out I found!

 

keep your stock se wheels. the phone dials are wack. i think the 4 lug pattern was on the 86 and 87 only.

 

I second that...those rims look sick when they look new...er...but those are well don't put them on your car, bad choice!

 

definately stick with the stock SE wheels