Will not stay running..
#1
Junior Member
Thread Starter
Join Date: Jul 2006
Location: south east hell
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Will not stay running..
I did a full 12 + tranny swap with a 12a i got for 150 bucks.
Its been in for a few weeks, but i turn the car over, it wont catch and fire.
If the car is pulled/rolled off it will run and get to about 1rpm and die,
this to me seems like it would be a carb problem, ive got 2 other carb laying around for thid car, but i also have a rebulid kit for it.
Any advice? or QUICK way to get this done?
If its from swapping a carb or rebuliding, or another issue...any ideas!?
Its been in for a few weeks, but i turn the car over, it wont catch and fire.
If the car is pulled/rolled off it will run and get to about 1rpm and die,
this to me seems like it would be a carb problem, ive got 2 other carb laying around for thid car, but i also have a rebulid kit for it.
Any advice? or QUICK way to get this done?
If its from swapping a carb or rebuliding, or another issue...any ideas!?
#2
Duct-tape fixes all
Join Date: Oct 2005
Location: Toronto, Canada
Posts: 1,000
Likes: 0
Received 0 Likes
on
0 Posts
your not getting fuel. Check your fuel pump. Is the choke working right? ( at least that is what it sounds like to me)
Also check float level in the carb. The gas should be half way up the site.
Also check float level in the carb. The gas should be half way up the site.
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM