THIS IS MY FIRST RX7 ITS A 84 GSL IT WAS RUNNING FINE I STOPED TO PULL INTO A DRIVE WAY AND I HAD NO PRESURE IN THE CLUTCH THE CLUTCH IS NOT BURNED I KNOW ITS NOT A CABLE CLUTCH AND I WANTED TO KNOW THE BEST WAY TO FINED OUT WHAT THE HELL IS WRONG

 

i had a leak in the small pressire line that goes to the slave cylinder, replaced it and the slave,,, works fine now, but make sure yours has fluid and has been bleed bfor spending any mony, could b that simple,,some times you can see fluid leaking but i dindt , the hole was very small in the hose,,,,,,,,good luck.......

 

Don't forget to check up under the dash, where the clutch pedal connects to the master cylinder. I overlooked that area for two weeks and wasted a bottle and a half of brake fluid, but parked on newspaper and found nothing.