1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Where is my regulator? 79 sa

Thread Tools
 
Search this Thread
 
Old Feb 11, 2008 | 02:04 PM
  #1  
maireeka's Avatar
Thread Starter
Full Member
 
Joined: Dec 2007
Posts: 84
Likes: 2
From: Hartselle, AL
Where is my regulator? 79 sa

I am installing an alternator from an 84 GSL into my 79 sa. I am using 1 wire to hook it up per wackyracers suggestions.

I know I have to remove the voltage regulator, but I can't find it! I searched and saw that it is supposed to be on the passenger side between the firewall and the strut tower but there is nothing there. I have pics on my phone but I can't post yet. There are a lot of relays etc on the driver side so I don't know what to unhook.

Can someone describe the regulator or post a pic?
Reply
Old Feb 11, 2008 | 04:02 PM
  #2  
maireeka's Avatar
Thread Starter
Full Member
 
Joined: Dec 2007
Posts: 84
Likes: 2
From: Hartselle, AL








I believe it is one of the silver boxes in the last pic. which one is it?

Also, what do I do with the wires after I disconnect the regulator? In one post i found, someone (wackyracer?) suggested splicing them together.
Reply
Old Feb 11, 2008 | 04:12 PM
  #3  
Persephone's Avatar
Junior Member
Tenured Member 05 Years
 
Joined: Nov 2004
Posts: 16
Likes: 0
From: Union Mills NC
The last pic, the flat like box to the left should be it.

That one is much different then the ones I have had on my car though.
Reply
Old Feb 11, 2008 | 04:20 PM
  #4  
maireeka's Avatar
Thread Starter
Full Member
 
Joined: Dec 2007
Posts: 84
Likes: 2
From: Hartselle, AL
the one that says "TRANSPO" on it?

maybe my car is a very very early sa or something.
Reply
Old Feb 11, 2008 | 05:43 PM
  #5  
sa7's Avatar
sa7
Rotary Enthusiast
Tenured Member: 15 Years
iTrader: (13)
 
Joined: Mar 2007
Posts: 771
Likes: 28
From: Woodstock, NB
Yes it is the one that says Transpo on it. It looks just like the one I had on my 79GS.
Reply
Old Feb 11, 2008 | 06:10 PM
  #6  
maireeka's Avatar
Thread Starter
Full Member
 
Joined: Dec 2007
Posts: 84
Likes: 2
From: Hartselle, AL
very good. now, does anyone know what I need to do with the wires once I remove the regulator?
Reply
Old Feb 11, 2008 | 06:14 PM
  #7  
teddyrx2's Avatar
One Luv "Till The End"
Tenured Member 15 Years
iTrader: (33)
 
Joined: Mar 2006
Posts: 13,757
Likes: 0
From: san diego
what are you trying to do? Limit the amount of wire in there? clean up the engine bay or something
Reply
Old Feb 11, 2008 | 06:47 PM
  #8  
maireeka's Avatar
Thread Starter
Full Member
 
Joined: Dec 2007
Posts: 84
Likes: 2
From: Hartselle, AL
no, i just wasnt sure if i needed to do anything wiring wise with the old regulator. i could care less what the engine bay looks like. at this point i just want her to run and drive reliably.
Reply
Old Feb 11, 2008 | 06:57 PM
  #9  
teddyrx2's Avatar
One Luv "Till The End"
Tenured Member 15 Years
iTrader: (33)
 
Joined: Mar 2006
Posts: 13,757
Likes: 0
From: san diego
oh okay
Reply
Old Feb 11, 2008 | 10:53 PM
  #10  
Druken's Avatar
Nekurd
Tenured Member 10 Years
 
Joined: Feb 2006
Posts: 1,129
Likes: 0
From: California
Maireeka, Do you mind taking pictures of the connections in the last picture? I'm having difficulties finding all of the connections for my external regulator and the other 3 squares. My tach isn't acting right and I know it is because something isn't connected right. Can you either PM me the pictures or post them here? I just need to see them for like 10 minutes. THanks
Reply
Old Feb 12, 2008 | 08:18 AM
  #11  
maireeka's Avatar
Thread Starter
Full Member
 
Joined: Dec 2007
Posts: 84
Likes: 2
From: Hartselle, AL
Ill get you some pics on wed mornin when I finish up the alt wiring. School today or I would do it now.
Reply
Old Feb 12, 2008 | 11:22 AM
  #12  
Druken's Avatar
Nekurd
Tenured Member 10 Years
 
Joined: Feb 2006
Posts: 1,129
Likes: 0
From: California
Thanks!
Reply
Old Feb 13, 2008 | 12:59 PM
  #13  
maireeka's Avatar
Thread Starter
Full Member
 
Joined: Dec 2007
Posts: 84
Likes: 2
From: Hartselle, AL
the alt upgrade fixed my charging issues AND my tach!

my headlights seem to work properly as well.

I did not have a camera with me, it was snowing and I wanted to get inside asap. I will try to get the pics friday.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Captain Hook
2nd Generation Specific (1986-1992)
13
Oct 4, 2015 06:35 PM
jdmbrendan
Introduce yourself
4
Oct 1, 2015 01:29 AM




All times are GMT -5. The time now is 09:04 PM.