where did this front airdam come from?
Trending Topics
roadkill hats rock
Joined: Jul 2001
Posts: 1,396
Likes: 0
From: Austin, Texas
Originally posted by MikeLMR
erm which 180SX is that then ?
erm which 180SX is that then ?
those are nice wheels and a nice front air dam
i like the smooth look of the dam, although it'd be nice if it had some foglight holes
![[FLaT]'s Avatar](https://www.rx7club.com/customavatars/avatar27919_1.gif){kind=avatar}
Full Member
Joined: Mar 2003
Posts: 106
Likes: 0
From: Los Angeles
Here's a link to the website with the pics, But it's in Japanese.
http://www.geocities.co.jp/MotorCity...a.tune.htm#fsp
http://www.geocities.co.jp/MotorCity...a.tune.htm#fsp
'Last Minute' Rallying
Joined: May 2002
Posts: 1,193
Likes: 0
From: Lincoln, England
'Last Minute' Rallying
Joined: May 2002
Posts: 1,193
Likes: 0
From: Lincoln, England
Looks like its a one off job
F spoiler production H14 11 The fender it started hitting, before, the F spoiler production which has been conceived from the time before it started. If you mention SA, it meaning that TWR, ƒCƒ€ƒT and JSS etc. are represented, it does, but somehow those which are different from the person! While with thinking, delusion it did. Whether as for making from zero that very it is impossible in the amateur, you think, somehow it cannot divert cannot process that it puzzled. When it does, some days ago in a certain shop, discovering aero it is removed! Furthermore, basic design, exactly are in your own image. Occasionally, measurement trying doing, it is the size may become somehow. The result in of negotiation, at cheap you make transfer it could do. To tell the truth this aero, it is R ƒXƒ| of ƒGƒXƒeƒBƒ}, don't you think?. Because it is FRP make, it cuts and also Hari is OK. With with the notion that where you say, it is start of F ƒXƒ| production! First, carrying out from shop. Lay down the suicide seat of SA, to place in the car, you close the rear gate and... do not close. It conveyed with the gate half-opened coming. Because this time, like ƒCƒ€ƒT, makes the spoiler only of the bottom of the mall, while thinking of design, it keeps cutting with the grinder. The dust of this time be enormous! The mask there is no lung with, it may be done, is. It surveys also the full-width and the depth etc. to fender arch and keeps cutting. Approximately, in 2 hours, approximately shape was completed, the fitting tried doing with the gummed cloth tape. Is also what as it is called in by your, but the ‚Á ‚¿‚å it is, -! With saying, processing for installing and so on, you do not do and as for the ‚Ä good thing is accumulation. With with the notion that where you say, section end of the first half. It follows to the latter half.... As for the photograph one shot which is in the midst of producing! It continues. Also the job which was advanced with urgent pitch ended, finally completed! Don't you think? please see in any case.
F spoiler production H14 11 The fender it started hitting, before, the F spoiler production which has been conceived from the time before it started. If you mention SA, it meaning that TWR, ƒCƒ€ƒT and JSS etc. are represented, it does, but somehow those which are different from the person! While with thinking, delusion it did. Whether as for making from zero that very it is impossible in the amateur, you think, somehow it cannot divert cannot process that it puzzled. When it does, some days ago in a certain shop, discovering aero it is removed! Furthermore, basic design, exactly are in your own image. Occasionally, measurement trying doing, it is the size may become somehow. The result in of negotiation, at cheap you make transfer it could do. To tell the truth this aero, it is R ƒXƒ| of ƒGƒXƒeƒBƒ}, don't you think?. Because it is FRP make, it cuts and also Hari is OK. With with the notion that where you say, it is start of F ƒXƒ| production! First, carrying out from shop. Lay down the suicide seat of SA, to place in the car, you close the rear gate and... do not close. It conveyed with the gate half-opened coming. Because this time, like ƒCƒ€ƒT, makes the spoiler only of the bottom of the mall, while thinking of design, it keeps cutting with the grinder. The dust of this time be enormous! The mask there is no lung with, it may be done, is. It surveys also the full-width and the depth etc. to fender arch and keeps cutting. Approximately, in 2 hours, approximately shape was completed, the fitting tried doing with the gummed cloth tape. Is also what as it is called in by your, but the ‚Á ‚¿‚å it is, -! With saying, processing for installing and so on, you do not do and as for the ‚Ä good thing is accumulation. With with the notion that where you say, section end of the first half. It follows to the latter half.... As for the photograph one shot which is in the midst of producing! It continues. Also the job which was advanced with urgent pitch ended, finally completed! Don't you think? please see in any case.
Thread
Thread Starter
Forum
Replies
Last Post
