where to buy water temp sensor for SA
the sender unit on my 79 is busted and my guage won't read. I've seen them at mazdatrix, but they say they only work with new housings and Mazda doesnt make the old ones anymore. To compound this problem, it's hard to find anything for an SA. It's really annoying when you look through Victoria British or Mazdatrix and everything is labeled "81-85". Anyway, does anyone know where I can find one??
sender
Originally Posted by rbf41182gt
the sender unit on my 79 is busted and my guage won't read. I've seen them at mazdatrix, but they say they only work with new housings and Mazda doesnt make the old ones anymore. To compound this problem, it's hard to find anything for an SA. It's really annoying when you look through Victoria British or Mazdatrix and everything is labeled "81-85". Anyway, does anyone know where I can find one??
Originally Posted by rx7doctor
Victoria British offers the sending unit for the 79-80 #71-622
its a just a temp sensor. all pre-86 except for GSL-SE are the same thing. if the colors are different, just hook it up directly. send me SASE if you want it. I have been junking those **** since the aftermarket water temp sender goes into that spot.
Trending Topics
Originally Posted by rbf41182gt
what version/ season are you getting that from? The latest one they sent me is summer '04, and they only have 81- 85.
Or you could take up Wacky's offer, he needs something to do because he's bored.
Originally Posted by rx7doctor
It's in the summer edition. Listed on right side of page 76 as #52. rx7doctor
Or you could take up Wacky's offer, he needs something to do because he's bored.
Or you could take up Wacky's offer, he needs something to do because he's bored.
Sensors
Originally Posted by rbf41182gt
but what is the difference between the coolant temp sensor on the left column, and the water temp on the right? Aren't they the same thing? Am I missing something?
reading in the dash. rx7doctor
Originally Posted by rx7doctor
When are you going to be finished with that motor so i can use it,lol. rx7doctor
Rich
Originally Posted by 64mgb
I don't know...I've been moving pretty slow. Between working too many hours, golf season starting here in Iowa, and being a little lazy, I haven't done much on it lately. I got the Holley 650 double pumper, so I have to get that installed and button up a couple of other things. I still need to work on mounting the front mount oil cooler and replacing the fuel system (Mallory fuel pump, fuel filter, and fuel pressure regulator). Looks like it'll be a while. But then I'll ship it right out to you!
Rich
Rich
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
Feb 24, 2019 12:09 PM
immanuel__7
2nd Generation Specific (1986-1992)
89
Sep 5, 2015 10:23 AM
befarrer
Microtech
3
Aug 22, 2015 05:52 PM



