wheels for gsl-se
#1
Full Member
Thread Starter
Join Date: Feb 2004
Location: vancouver b.c
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
wheels for gsl-se
i know this has probably been covered before but i searched and couldn't find a very good thread for it so........
i'm thinking about getting some aftermarket wheels for my se probably some 15's.
if you have any suggestions or even better pics of what you're running that would be much appreciated. thank you.
p.s.
i don't really want any flashy bling rims but post yours up if you'd like.
thanks.
i'm thinking about getting some aftermarket wheels for my se probably some 15's.
if you have any suggestions or even better pics of what you're running that would be much appreciated. thank you.
p.s.
i don't really want any flashy bling rims but post yours up if you'd like.
thanks.
#3
84SE-EGI helpy-helperton
Good size to replace stock SE 14's = 15" rim diameter, 7" width, and 38-40mm offset. This will keep clearance between the rubber and the spring and perch, but also give you a slight increase in wheel width and diameter without sacrificing performance through a huge weight increase which negatively impacts acceleration, braking, turning force, and unsprung weight during cornering.
A good tire size to go with this wheel is 205/50/15 in an aggressive tread pattern. You could probably go as wide as 215/50, but you're getting very close to interference between the tire and the springs in the front. HTH,
Edit: oh, yeah - you need 4x114.3mm or 4x4.5" - this is a very common 'import' bolt diameter and spacing.
A good tire size to go with this wheel is 205/50/15 in an aggressive tread pattern. You could probably go as wide as 215/50, but you're getting very close to interference between the tire and the springs in the front. HTH,
Edit: oh, yeah - you need 4x114.3mm or 4x4.5" - this is a very common 'import' bolt diameter and spacing.
Trending Topics
#8
Rotary Enthusiast
Join Date: Jun 2002
Location: Yokosuka
Posts: 1,058
Likes: 0
Received 0 Likes
on
0 Posts
Hey I am converting to SE suspension and looking for a set of SE rims, or decent aftermarkets..
I was looking at Konig Rewind, but they're too expensive for me right now.
I was looking at Konig Rewind, but they're too expensive for me right now.
#10
KARATE EXPLOSION
iTrader: (1)
i'd like to get a set of these if they come in the offset for the SE http://www.konigwheels.com/images/430_b.jpg
or something similar. i think panas are too rich for my blood right now.
i also dig the basket weave bbs style. i saw some hot enkeis on a 12a fb before. i think they were 14". that would look rad on my car i think.
or something similar. i think panas are too rich for my blood right now.
i also dig the basket weave bbs style. i saw some hot enkeis on a 12a fb before. i think they were 14". that would look rad on my car i think.
#22
Originally Posted by oldsk00l
is there a differant bolt pattern or anything between gsl-se and gsl?
#23
RX for fun
iTrader: (13)
Originally Posted by d0 Luck
old school centerlines
just recently reconditioned them. and yes, they are for sale! i'm currently getting the other pair done as well.
just recently reconditioned them. and yes, they are for sale! i'm currently getting the other pair done as well.
fake. american racing wannabeee centerlines look-a-like. the real ones will have a centerline tags near the lugs
#24
Originally Posted by wackyracer
fake. american racing wannabeee centerlines look-a-like. the real ones will have a centerline tags near the lugs
btw. it doesn't say american racing on it either. maybe it's a combination of both... they merged in 1!
Last edited by d0 Luck; 07-08-05 at 04:17 PM.
#25
Junior Member
Join Date: Dec 2003
Location: Las Vegas
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Get The Konig Rewinds...! Or if you have the money Panasports...They go very well with the car...I have an SE with Bronze Rewinds w/ polished lip...and another set of black with polished lip...and for $525 from T3 off of Club4ag.com