What are your winter projects?
#28
MattG FTW!!!!!
iTrader: (2)
Join Date: Feb 2005
Location: South Windsor, CT
Posts: 2,733
Likes: 0
Received 0 Likes
on
0 Posts
2GCDFIS with TT board, paid for because I suck at soldering, Xbox is my proof! Welding = awesome / soldering = sucky! go figure
A header with a RB muffler. Got a SP, but still have stock manifold on there. Dumb, I know!
Taking off the bumpers and sanding them down and repainting them. Damn Bugs!!
And a little Idea that im coming up with to get more air flow to the rad. More details soon!
A header with a RB muffler. Got a SP, but still have stock manifold on there. Dumb, I know!
Taking off the bumpers and sanding them down and repainting them. Damn Bugs!!
And a little Idea that im coming up with to get more air flow to the rad. More details soon!
#29
spoon!
Hrm...
Street car, I need to swap in the S4 13B I have, tear out the stock engine harness, tear out the AC, get the megasquirt tuned, swap in my suspension parts, and various other little stuff. Oh, and make a dual belt alternator pulley.
The Prod car... ergh. Get new clutch plates for the QM clutch, swap to 2-piece front brake rotors, swap GSL-SE rear end in, rebuild and port the **** out of the GSL-SE 13B, port the **** out of the manifold, modify the front strut housings, rebuild the fuel system, hang the new bodywork (well, for that matter, *make* some of it) and fab ducting for the intake manifold, radiator and oil cooler. Plus add a lot of tubes to the cage.
... I know I'm forgetting stuff, but oh well.
Street car, I need to swap in the S4 13B I have, tear out the stock engine harness, tear out the AC, get the megasquirt tuned, swap in my suspension parts, and various other little stuff. Oh, and make a dual belt alternator pulley.
The Prod car... ergh. Get new clutch plates for the QM clutch, swap to 2-piece front brake rotors, swap GSL-SE rear end in, rebuild and port the **** out of the GSL-SE 13B, port the **** out of the manifold, modify the front strut housings, rebuild the fuel system, hang the new bodywork (well, for that matter, *make* some of it) and fab ducting for the intake manifold, radiator and oil cooler. Plus add a lot of tubes to the cage.
... I know I'm forgetting stuff, but oh well.
#33
No, it is not stock!
iTrader: (1)
I am afraid my entire winter will be occupied with the project recently described here:
https://www.rx7club.com/1st-generation-specific-1979-1985-18/creative-use-gsl-se-oil-cooler-485065/
When that is finished, I will be putting my V8 powered RX-7 up for sale.
https://www.rx7club.com/1st-generation-specific-1979-1985-18/creative-use-gsl-se-oil-cooler-485065/
When that is finished, I will be putting my V8 powered RX-7 up for sale.
#34
On the prowl for an FB
iTrader: (1)
Join Date: Sep 2002
Location: Surrounded by Sebey parts, Rhode Island
Posts: 2,932
Likes: 0
Received 6 Likes
on
4 Posts
Originally Posted by John64
I will be doing stainless lines for the brakes. Maybe some stereo adjustments.
I hope I'm not running out of projects, it just looks lame compared to last years suspension upgrade and cooling system overhaiul.
I hope I'm not running out of projects, it just looks lame compared to last years suspension upgrade and cooling system overhaiul.
In the meantime, here's one of my many random ideas:
https://www.rx7club.com/1st-generation-specific-1979-1985-18/i-have-idea-but-i-need-help-487290/
#37
WON'T FORGET DAVE
iTrader: (7)
Join Date: Sep 2005
Location: Twin Cites
Posts: 1,786
Likes: 0
Received 0 Likes
on
0 Posts
finish front suspension i started last month, motor rebuild, new carb setup? new fuel setup? hopefully before spring........but the way i see it, it's always spring in so cal....
#38
Moderator
iTrader: (3)
most of my winter should be spent tending to my streetport 12A project. i haven't had much time to dedicate to it consistently, but considering that i no longer have an intake for my 13B, i'll need to finish this as soon as possible. all i have left are: flywheel, rotating assembly balancing, rotor bearings to put the motor together. afterwards, i need an oil pump, then it should be ready to go.
1
1
#39
Banned. I got OWNED!!!
Join Date: Dec 2002
Location: wishing i was back in FL
Posts: 4,192
Likes: 0
Received 0 Likes
on
0 Posts
well, my winter project got finished over the summer
soooo... this winter i'll be enjoying it and beasting on the highway and the couple track events left for the year.
and crappy enough, ported motor and bigger turbo won't be in till probably winters end.
soooo... this winter i'll be enjoying it and beasting on the highway and the couple track events left for the year.
and crappy enough, ported motor and bigger turbo won't be in till probably winters end.
#40
Green to RX-7's
Join Date: Oct 2005
Location: Atlanta
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
Well i'm getting Monroe shocks and struts put on next week and sence it is daily driver and they were at a discount price though the place i work i picked them up...
My main project this winter when i can get the stuff to do it is get the rust of of the body of the car... even if i just have to spray paint over the finish parts so that they don't rust again until i can get the paint job on the car... i really just need someone that knows body work to help me out so that i don't **** it up.
other than that breaks and tires are next on the list.
My main project this winter when i can get the stuff to do it is get the rust of of the body of the car... even if i just have to spray paint over the finish parts so that they don't rust again until i can get the paint job on the car... i really just need someone that knows body work to help me out so that i don't **** it up.
other than that breaks and tires are next on the list.
#41
Junior Member
Join Date: Dec 2004
Location: Pensacola Florida
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Getting my car to run like it is supposed to (actually better). I will hopfully be getting my friends old 12A from his 84-85, he dosnt know the year, and the car is in the shop so I cant read the VIN to see the year, so it should have less milage than my 82, or hopfully, and it also has an aftermarket exhaust with no cats, and the AC has been removed, as well as other little things done to it, so that should be good. I also hope to get a decent sound system, and a conversion to a different bolt pattern so I can get some new wheels, but that might not happen until later.
#42
What?
Thread Starter
Well winter is here and what are you doing now??
I got the 7 on jack stands, cleaned the brakes and surrounding area. The new SS lines will be in next week! Any suggestions while I have her in the air?
I got the 7 on jack stands, cleaned the brakes and surrounding area. The new SS lines will be in next week! Any suggestions while I have her in the air?
#46
Full Member
Join Date: Jul 2002
Location: Birmingham, AL
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Well, my wife finally found a job, and will be starting after the new year. As such, I have put in my notice at my second/night job (phew) and will finally have a little time to devote to the mostly-halfway-decent project '82 GSL that's been sitting in my basement garage essentially untouched since about Halloween.
Here's the plan, in order of attack:
Tune-up, adjust timing and idle mixes, stick new plugs in
RB streetport exhaust ($$$!) so I can get it registered and drive it
A little surface rust repair/ replace header panel/ get at least primer on the spots
Auto trans coming out, 5spd going in.
Sterling carb
Decent repaint in silver, just so I don't have to pull motor/paint doorjambs, etc
Reupholster doorcards, maybe even get a stereo working in the thing.
New wheels and/or doing something fun with the stockers- maybe I'll paint them red or something.
I hope to be done with at least the first two or three of those (and hopefully the fourth...) by April so I can make it to ye olde taile of the dragon for the rotary rally then.
Here's the plan, in order of attack:
Tune-up, adjust timing and idle mixes, stick new plugs in
RB streetport exhaust ($$$!) so I can get it registered and drive it
A little surface rust repair/ replace header panel/ get at least primer on the spots
Auto trans coming out, 5spd going in.
Sterling carb
Decent repaint in silver, just so I don't have to pull motor/paint doorjambs, etc
Reupholster doorcards, maybe even get a stereo working in the thing.
New wheels and/or doing something fun with the stockers- maybe I'll paint them red or something.
I hope to be done with at least the first two or three of those (and hopefully the fourth...) by April so I can make it to ye olde taile of the dragon for the rotary rally then.
#49
Admitted Sevenaholic
Join Date: Feb 2001
Location: Ashland, OH
Posts: 1,910
Likes: 0
Received 0 Likes
on
0 Posts
Theres 2 more outside, you can see my 83 thru the window kinda and my 626 Turbo..... The Targa one is PaulAbers on the forum. Thats his garage he is so kind to let me use.