What to expect...
Thread Starter
Full Member
Joined: Oct 2005
Posts: 133
Likes: 0
From: Miami
What to expect...
Ok so this weekend or next weekend my project will begin.
Putting a 13bt 2 in a 82 rx7.
So far I have the motor , a FMIC , haltech ECU , greddy electronic boost controller.3" full exhaust.
What kind of numbers should i be expecting ??
Putting a 13bt 2 in a 82 rx7.
So far I have the motor , a FMIC , haltech ECU , greddy electronic boost controller.3" full exhaust.
What kind of numbers should i be expecting ??
FB+FC=F-ME
Joined: Jul 2004
Posts: 3,353
Likes: 5
From: Rohnert Park CA
Totally depends on your turbo,injector,fuel pump capabilities.
If your running a S4 engine,your turbo is extremely limited because of its small wastegate.A S5 turbo is far better at controlling its output and not spiking/killing the engine.
You should be able to safely make 220-230 crank HP with all stock components and the Haltech.Plan on running a better fuel pump than stock and some larger secondary injectors wont hurt either,if you run around 11-12psi.Anything above/around 13-14psi and your gonna be seriously overworking the stock turbo, S4 or S5.....
If your running a S4 engine,your turbo is extremely limited because of its small wastegate.A S5 turbo is far better at controlling its output and not spiking/killing the engine.
You should be able to safely make 220-230 crank HP with all stock components and the Haltech.Plan on running a better fuel pump than stock and some larger secondary injectors wont hurt either,if you run around 11-12psi.Anything above/around 13-14psi and your gonna be seriously overworking the stock turbo, S4 or S5.....
Thread
Thread Starter
Forum
Replies
Last Post