Hi I recently bought a 85 rx7 GSL

Im lookin for ANY weber intake/car kit that has been rebuilt or used....I need help finding one and im wondering about much HP i could crank out of a 12a with a Pacesetter exhaust-headers-weber kit-k&n air kit????

I would be gracious for any help!

 

Go for a Webber 48IDA.. it will give you the most power and is probably the best carb around for a rotary..

-Zach

 

Yeah, any decent 48mm 2 Barrel should do wonders for you. Ditch that Pacesetter header for the stock manifold and you'll be looking at a few more HP . With a stockport engine, RB header and 48 carb you should be around 150hp at the flywheel.

 

ok....ive heard everyone Saying thats a great carb! but how much for a new onew/kit and where can i find one? REBUILT? I heard i could find one for around 400 rebuilt

 

Well, they don't make them anymore..

Check http://www.thepartstrader.com they are on there sometimes..

They usually go for ~500-800 with a manifold..


If you find one without a manifold you can buy a new manifold from http://www.racingbeat.com

Also definatly ditch the pacesetter header.. they are terrible!


-Zach