kutukutu1

iTrader: (5)

Hey guys i have been searching for this, but cant seem to find it.
I dont like the water to oil and want to switch to regular oil cooler. its an 84 12a can i just buy an end and front plate and the oil cooler plus lines and just do a straight switch over or is there a difference in the two engines?

JoeNoble

iTrader: (6)

https://www.rx7club.com/showthread.p...ght=oil+cooler

kutukutu1

iTrader: (5)

thank you man this was an awesome write up.

trochoid

iTrader: (6)

You're welcome. The only difference in the engines is the coolant line out the rear iron. No need to change it.

kutukutu1

iTrader: (5)

what do you mean no need to change the coolant line in the rear iron?
are you talking about the antifreeze lines or oil line in the rear iron, kinda confused.

trochoid

iTrader: (6)

The difference between the beehive and fmoc engines is the beehive engine has a teed coolant line coming off of the rear iron.. That's covered in my write up.

kutukutu1

iTrader: (5)

oh k, i get it, thats the only difference everything else is a straight bolt on, got you. thanks alot.