wat can a 12a-t pull out
Apprentice Guru
Joined: Oct 2001
Posts: 1,425
Likes: 0
From: Cloud Nine and Peak of God
I suggest a large Weber IDA with a Series 5 turbo. Then as a start you will meed to upgrade gearbox, clutch, flywheel, wheels and tires.possibly with FMIC, FMOC, diff,
As for rwhp, depending on use it can be between 300 and 750 depending on what the intended use of the car and the most important factor, money.
Most serious people go down the 13BT route, so there are few examples of really high powered 12A endines with an added turbo. A typical set-up for a street/occasional competition car is at the bottom end of that range.
As for rwhp, depending on use it can be between 300 and 750 depending on what the intended use of the car and the most important factor, money.
Most serious people go down the 13BT route, so there are few examples of really high powered 12A endines with an added turbo. A typical set-up for a street/occasional competition car is at the bottom end of that range.
Joined: Jul 2002
Posts: 7,301
Likes: 3
From: District of Columbia
it can pull a rock out of my packet. WTF PULLOUT!!?!?!?! LOL I had a buddie that PUT DOWN!! 200rwhp on a 12A with 213,000 miles with a delorto, huge intercooler, and a s4 trubo at 12 psi.
And so you know, pulling out doesn't work. You can still get her pregnant!
And so you know, pulling out doesn't work. You can still get her pregnant!
Last edited by Hyper4mance2k; Jul 7, 2006 at 05:59 AM.
Thread
Thread Starter
Forum
Replies
Last Post
rotor_veux
2nd Generation Specific (1986-1992)
3
Sep 28, 2015 09:25 PM