vent problem
I think they call that part the logicon. You have cold solder that is not making good contact.
You need to remove the controls (logicon) disassemble to expose the printed circuit board. Remove the bad solder using a solder wick and resolder...
You need to remove the controls (logicon) disassemble to expose the printed circuit board. Remove the bad solder using a solder wick and resolder...
Our 84/85 cars have an optional push button type of heater/AC controls instead of the lever select type. Each button has a light on it to tell you what mode you are in (HEAT, VENT, etc.). Once the selected button is pushed, a motor moves the selector arm into the desired position.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM



:
