update #2 on gsl-se
05-20-05, 06:18 PM
#1
Junior Member
Thread Starter
Join Date: Apr 2005
Location: phoenix, arizona
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
update #2 on gsl-se
so my charcoal can has been plugged this whole time so i removed it.
also removed airpump and capped off acv and airbox.
and as for hot start issues and flooding... got that figured out too!!!
anyone have a good charcoal can cheap???
anyone have an extra acv block off plate and gasket???
also need a vacum check valve(one way?) for choke(that is just rearward of choke assy.
--- flooding/hot start---
when car doesnt instantly startup(usual is 1-2 sec of cranking) push gas pedal to floor and hold till start. prevents hot-start vapor lock and flooding.
also removed airpump and capped off acv and airbox.
and as for hot start issues and flooding... got that figured out too!!!
anyone have a good charcoal can cheap???
anyone have an extra acv block off plate and gasket???
also need a vacum check valve(one way?) for choke(that is just rearward of choke assy.
--- flooding/hot start---
when car doesnt instantly startup(usual is 1-2 sec of cranking) push gas pedal to floor and hold till start. prevents hot-start vapor lock and flooding.
Thread
Thread Starter
Forum
Replies
Last Post
NickNac113
1st Generation Specific (1979-1985)
13
10-01-15 09:25 PM