Two Crane HI6 on leading igniter.
#1
Senior Member
Thread Starter
Join Date: Jun 2002
Location: S.A. Texas/Tokyo Japan
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
Two Crane HI6 on leading igniter.
Anyone run two Crane HI6 boxes and two crane LX92 coils of the leading igniter? One box and coil per leading plug. It works, just don't know how long. The box drives the coils and the igniter drives the box. So the box should not put to much load on the igniter, correct? I've seen guys run strait of the pickup but heard the wires from the box have to be switched. True???
I was running one HI6 and a turboII leading coil of the leading igniter with good results. But now that the boost is over 25psi, I'm getting ignition breakup. The reason for going with two HI6 boxes and two coils on the leading plugs.
thanks
chuck
I was running one HI6 and a turboII leading coil of the leading igniter with good results. But now that the boost is over 25psi, I'm getting ignition breakup. The reason for going with two HI6 boxes and two coils on the leading plugs.
thanks
chuck
Thread
Thread Starter
Forum
Replies
Last Post
23Racer
Race Car Tech
1
09-21-15 10:48 AM