1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Turns but sounds like it has no compression after carb rebuild

Thread Tools
 
Search this Thread
 
Old 12-15-13, 11:26 AM
  #1  
Full Member

Thread Starter
iTrader: (1)
 
RxRolla's Avatar
 
Join Date: Apr 2006
Location: San Antonio
Posts: 218
Likes: 0
Received 0 Likes on 0 Posts
Turns but sounds like it has no compression after carb rebuild

So the carb (side draft) was leaking on the 12a so we decided to rebuild it. Once the carb went in it flooded the motor and caused us to drain the battery. We got new spark plugs and jumped the car but now it doesnt even try to start, there is fuel and spark but when it turns it sounds like it has no compression. I just finger checked the compression and its fine plus nothing could have just blown a seal without even starting.

Very confused and need the car asap.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cristoDathird
Introduce yourself
28
05-30-19 08:47 PM
Rotospectre
New Member RX-7 Technical
3
03-28-18 03:33 PM
elfking
3rd Generation Specific (1993-2002)
3
08-19-15 09:48 PM
Marty RE
New Member RX-7 Technical
0
08-13-15 11:19 AM



Quick Reply: Turns but sounds like it has no compression after carb rebuild



All times are GMT -5. The time now is 03:56 AM.