they both dont work. it was working fine and all of a sudden it stoped working. i had the same prob about 2 yrs ago but then it somehow started working again. but now both dont work again? what could be wrong? when it broke 2 yrs ago i went through everything that was anything that i thought was the problem. but now idk what to do again. or where to look. is there a flasher relay or something? where do i start to look?

 

There's plenty of relays in this car

I can't tell you exactly, but I CAN tell you taht this is posted twice, and you may want to close one of the other ones (or change it to another thing that's bugging you for conservation!)

Peace

 

Do a search on flashers.. There are threads that show you where to look for them. I think the flasher is near the fusebox. If the turn signals light up, but don't flash (and all of your bulbs are good), then that is your problem.

Dave

 

The flasher relay is a black box just above the clutch pedal. 4 nuts holding it up, PITA to get out. In it you will see a small PC board. There is 2 rows of through hole pins side by side. This is where the cold solder joints that cause this is normally found. Soldering iron and just a few minutes to fix.

 

 

That is the connecors that I was refering to. Take the PC board out and re-solder those joints.

 

what is that other black box for? i think it got disconnected. but when i connect it back it blows my fuse for my gauges????????

 

Other black box? That is the only one that I can think of at the moment that is located there. Unless you have a short somewhere else or are installing it with the switch on.