turbo 2 swap
#1
****** money pits
Thread Starter
turbo 2 swap
i have a 81 gs that i put a gsl drive shaft and entire rear end with the disk brakes
but i want the 13b turbo out of an s4
i have heard that you can only use a s4 motor so it will bolt up to the trany then i guess i need new motor mounts and a gsl se rear end and axles
i just want to get some advice from some one who has a completed swap into their first gens anything would help im just tired of getting the runaround
thanks
but i want the 13b turbo out of an s4
i have heard that you can only use a s4 motor so it will bolt up to the trany then i guess i need new motor mounts and a gsl se rear end and axles
i just want to get some advice from some one who has a completed swap into their first gens anything would help im just tired of getting the runaround
thanks
#4
Never Follow
iTrader: (18)
The gsl rear you have in there will handle the power as long as you don't beat the hell out of it. You'll also want the T2 trans, this will require a custom driveshaft, and no T2 engine will bolt right into a first gen, the first gen front cover must be used.
Like they said do a search, this has been covered many times, once you've done that post your new more specific questions for us
Like they said do a search, this has been covered many times, once you've done that post your new more specific questions for us
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM