tinoeast14k

I have a 85 gsl with auto tranny. I want to swap a 5 speed into it! Im tryin to see if anyone did it before and what would I need????

teddyrx2

iTrader: (33)

flywheel clutch and pressure plate, clutch slave cylinder clutch master cyclinder third pedal for the clutch not much but time and elbow work. Find your self a junker at the yard and strip everything off of it and slap that **** into your automatic and your good

KansasCityREPU

iTrader: (9)

Check out these threads:

https://www.rx7club.com/showthread.p...p+in+%2785+gsl

https://www.rx7club.com/showthread.p...p+in+%2785+gsl

There is a good picture in this one of the bracket that needs to be made. The design of the braket might be improved.

https://www.rx7club.com/1st-gen-archive-71/drivetrain-84-85-automatic-manual-transmission-conversion-question-701724/

Jeezus

iTrader: (4)

Take off that auto counterweight as well.

Jaime Enriquez

...and save it for the light flywheel conversion and save some $$!

mazdaverx713b

iTrader: (91)

and get a manual trans pedal addembly, a manual trans driveshaft, a manual trans crossmember and mount and with the above said you should have everything necessary to do your swap.