Today's progress. MSD and FC fuse block mounted
Thread Starter
Joined: Feb 2003
Posts: 1,637
Likes: 23
From: Illinois
Today's progress. MSD and FC fuse block mounted
Cut and welded an aluminum shelf for my msd and the FC fuse block. Also made a nice area to mount relays across it.
Joined: Aug 2011
Posts: 3,078
Likes: 42
From: Cambridge, Minnesota
Looks sweet! Did you cut a hole through the bottom of the bracket for the FC fuse block to bolt onto? I just don't see any wires running out of the bottom yet - just curious.
Thread Starter
Joined: Feb 2003
Posts: 1,637
Likes: 23
From: Illinois
No wires run yet. I'm kinda avoiding that part 
. The wires are all going over the fender in the top left of the pic. Previous owner stripped the harness and didn't mark anything.
. The wires are all going over the fender in the top left of the pic. Previous owner stripped the harness and didn't mark anything.
Joined: Aug 2011
Posts: 3,078
Likes: 42
From: Cambridge, Minnesota
I'd just get the old manual out with a wiring diagram and go to town! Luckily on a 12a there's not too much to run in regards to wires and sensors
Thread
Thread Starter
Forum
Replies
Last Post
The Shaolin
2nd Generation Specific (1986-1992)
9
Sep 14, 2015 07:50 PM
CaptainKRM
2nd Generation Specific (1986-1992)
14
Aug 26, 2015 09:52 PM
