Today's progress. MSD and FC fuse block mounted
1 Attachment(s)
Cut and welded an aluminum shelf for my msd and the FC fuse block. Also made a nice area to mount relays across it.
https://www.rx7club.com/attachment.p...1&d=1359171392 |
Looks sweet! Did you cut a hole through the bottom of the bracket for the FC fuse block to bolt onto? I just don't see any wires running out of the bottom yet - just curious.
|
No wires run yet. I'm kinda avoiding that part :(. The wires are all going over the fender in the top left of the pic. Previous owner stripped the harness and didn't mark anything.
|
Originally Posted by seanrot
(Post 11356600)
No wires run yet. I'm kinda avoiding that part :(. The wires are all going over the fender in the top left of the pic. Previous owner stripped the harness and didn't mark anything.
I'd just get the old manual out with a wiring diagram and go to town! Luckily on a 12a there's not too much to run in regards to wires and sensors |
All times are GMT -5. The time now is 04:03 PM. |
© 2024 MH Sub I, LLC dba Internet Brands