For those with ideling problems,i found it !
#1
Junior Member
Thread Starter
Join Date: Jan 2002
Location: national city ca
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
For those with ideling problems,i found it !
Without tearing everything apart,first i researched as much as i could
about ANYTHING rough idel,,searching mazdatrix site,found a "how-to"
section.In that section the topic is "coasting valve" shows how to test,
I test my 7 ,,and it was right on the money,,it was sucking air BIG.
now i know to get a new decel. "coasting" valve,, BTW,,,
my plugs,wires,cap/rotor,fuel filter,and spark were all ok,,too,,,nailed that MF
about ANYTHING rough idel,,searching mazdatrix site,found a "how-to"
section.In that section the topic is "coasting valve" shows how to test,
I test my 7 ,,and it was right on the money,,it was sucking air BIG.
now i know to get a new decel. "coasting" valve,, BTW,,,
my plugs,wires,cap/rotor,fuel filter,and spark were all ok,,too,,,nailed that MF
#2
I checked this out right away and concluded two things 1. My coasting shutter valve whatever thingy is pooped 2. It seems like and absolute pig sty to try and fix myself?
#3
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,847
Received 2,606 Likes
on
1,849 Posts
its actually easy. you unbolt the carb, and swing it out of the way (no need to disconnect anything i think), and then its right there. its really a 15 minute job.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM