Tach rev buzzer
06-27-10, 09:37 PM
#1
On RX number 8..........
Thread Starter
iTrader: (2)
Join Date: Feb 2002
Location: Houston, TX
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Tach rev buzzer
Ok, first of all I searched. All I could find was threads on disabling the buzzer, turning the buzzer into a shift light. My problem is my buzzer barely works. Sometimes it comes on right at 7000RPM, sometimes it doesn't. I made some videos to show what I mean.
Free rev in neutral, Buzzer only worked once.
From a stop, no buzzer in 1st at 7800RPM, but good buzzer at 6800RPM in 2nd.
Again, same deal
Here I got a good 1st gear buzzer, but nothing in 2nd...even up to 8000RPM!
So, what the heck can I do to fix it?
Free rev in neutral, Buzzer only worked once.
From a stop, no buzzer in 1st at 7800RPM, but good buzzer at 6800RPM in 2nd.
Again, same deal
Here I got a good 1st gear buzzer, but nothing in 2nd...even up to 8000RPM!
So, what the heck can I do to fix it?
06-29-10, 10:30 PM
#5
On RX number 8..........
Thread Starter
iTrader: (2)
Join Date: Feb 2002
Location: Houston, TX
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Figures, today, just driving, I decide to open her up.....friggin buzzer worked perfectly every time. I have to have a loose connection somewhere. One weekend, I'll remove the gauge cluster and check all the solder joints. Could there be any loose connections under the hood? Does it get a separate signal off the coil?
Thread
Thread Starter
Forum
Replies
Last Post
