swaping rear end and suspension
#1
Full Member
Thread Starter
swaping rear end and suspension
hey guys!!! i recently picked up a 84 se with racing beat springs and tokico blues all around... i wanted to know if it was possible to swap the springs, shocks and rear end into my 83 with no problem... i have a regular 83 with the drums in the rear... i also have the 4x110 lug pattern... thank you in advance...
#2
Round and Round
iTrader: (10)
Springs, shocks and strut inserts are the same. If you swap the rear end you should also swap the front struts to have the larger GSLSE brakes, lug nuts and bolt pattern on all four wheels. Front strut, rotor and caliper can be swapped as a unit without disassembly. When you swap the rear end you will need the short e-brake cables that attach to the rear calipers and probably the GSLSE drive shaft. I believe the driveshaft/rearend flange changed during the 83 model year.
Here's some pictures of the rear end swap and front strut removal.
http://intertron.com/ron/84.html
http://intertron.com/ron/st.html
Here's some pictures of the rear end swap and front strut removal.
http://intertron.com/ron/84.html
http://intertron.com/ron/st.html
#3
Full Member
Thread Starter
Springs, shocks and strut inserts are the same. If you swap the rear end you should also swap the front struts to have the larger GSLSE brakes, lug nuts and bolt pattern on all four wheels. Front strut, rotor and caliper can be swapped as a unit without disassembly. When you swap the rear end you will need the short e-brake cables that attach to the rear calipers and probably the GSLSE drive shaft. I believe the driveshaft/rearend flange changed during the 83 model year.
Here's some pictures of the rear end swap and front strut removal.
http://intertron.com/ron/84.html
http://intertron.com/ron/st.html
Here's some pictures of the rear end swap and front strut removal.
http://intertron.com/ron/84.html
http://intertron.com/ron/st.html
Thread
Thread Starter
Forum
Replies
Last Post