1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Suspension Q - 'bang' at rear

Thread Tools
 
Search this Thread
 
Old Feb 8, 2007 | 10:38 PM
  #1  
beasley's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 20
Likes: 0
From: Australia
Suspension Q - 'bang' at rear

Quick question: My car has developed a bang in the rear drivers side suspension after jacking up the car for a clutch replacement. The suspension is quite stiff and when I was jacking it up, the rear tyres also left the ground on each side. The bang is only over medium/large bumps and the movement feels OK when parked. Any ideas on the problem?
Reply
Old Feb 8, 2007 | 10:41 PM
  #2  
84RX_Se7en's Avatar
Rockin' the suburbs!
Tenured Member 05 Years
 
Joined: May 2006
Posts: 499
Likes: 0
From: Dayton, Ohio
Possibly old dead suspension. Shocks might be going bad.
Reply
Old Feb 8, 2007 | 10:44 PM
  #3  
beasley's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 20
Likes: 0
From: Australia
Hoping not to hear that! Thought it might be the spring just moved from its position or something. Damn. This might be the start of pouriing even more money into the b*tch.
Reply
Old Feb 8, 2007 | 11:01 PM
  #4  
bliffle's Avatar
Rotary Freak
Tenured Member 10 Years
 
Joined: Sep 2002
Posts: 2,815
Likes: 0
From: SF BayArea
What year and model of b*tch is this? My SE, like every SE I've driven, bottoms out rather easily on the rear limit snubbers. Fortunately, the rear shocks are cheap and rather easily replaced, I think, and that's easier and cheaper than waiting too long and having to replace weakened springs.
Reply
Old Feb 8, 2007 | 11:14 PM
  #5  
beasley's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 20
Likes: 0
From: Australia
Have a look at the car how low it is at.
https://www.rx7club.com/1st-generation-specific-1979-1985-18/day-pics-daytona-widebody-finally-619325/


It is an 82 Model, I suppose I better jack it up and have a look instead of being lazy? (plus i'm at work)
Reply
Old Feb 8, 2007 | 11:16 PM
  #6  
beasley's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 20
Likes: 0
From: Australia
By the way, how do I tell if the shock is stuffed?
Reply
Old Feb 8, 2007 | 11:21 PM
  #7  
876portturbo's Avatar
getcha brap on
Tenured Member 05 Years
iTrader: (4)
 
Joined: Sep 2006
Posts: 355
Likes: 1
From: North TX
I had a bad rear exhaust hanger on my 85 that made it clunk over some bumps, just a thought
Reply
Old Feb 8, 2007 | 11:26 PM
  #8  
beasley's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 20
Likes: 0
From: Australia
Thanks will have a look at the exaust because I basically had to disconnect nearly all of it when replacing the clutch. I hope this is the problem but as it is an custom 2' all the way through and doesnt seem to go near anything, i doubt it is.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BNR34RB26DETT
Build Threads
42
Feb 28, 2018 11:27 AM
primerGrey
Suspension/Wheels/Tires/Brakes
10
Aug 25, 2015 02:46 PM




All times are GMT -5. The time now is 01:53 AM.