Stuff I just got in from Mazdatrix...
#1
Senior Member
Thread Starter
Join Date: Sep 2007
Location: Texas
Posts: 338
Likes: 0
Received 0 Likes
on
0 Posts
Stuff I just got in from Mazdatrix...
I ordered a bunch of stuff....here it all is...came in on schedule.
Case of Idemitsu 10w-30 Racing Oil
Case of Idemitsu Fuel Premix
5 Quarts of Idemitsu Gear Oil
ACV Block-off
OMP MOP block-off
two intake gaskets
brake master cylinder rebuild kit
clutch master cylinder rebuild kit
Neo Grease
Anti-Seize
Stainless Braided clutch hose
New Oil Pan Gasket
Mazdatrix sticker
and i also bought an EGR block-off for my s4 block from Racing Beat.
Hopefully if my s4 block is good....all this will be put to use in the next week.
I will take pics and keep everybody updated as I go.
Pics:
Case of Idemitsu 10w-30 Racing Oil
Case of Idemitsu Fuel Premix
5 Quarts of Idemitsu Gear Oil
ACV Block-off
OMP MOP block-off
two intake gaskets
brake master cylinder rebuild kit
clutch master cylinder rebuild kit
Neo Grease
Anti-Seize
Stainless Braided clutch hose
New Oil Pan Gasket
Mazdatrix sticker
and i also bought an EGR block-off for my s4 block from Racing Beat.
Hopefully if my s4 block is good....all this will be put to use in the next week.
I will take pics and keep everybody updated as I go.
Pics:
#2
Rotary Enthusiast
Join Date: Dec 2007
Location: Texas
Posts: 1,079
Likes: 0
Received 0 Likes
on
0 Posts
I always think of Jay Leno's Cosmo. He dropped Mazdatrix name on TV when talking about the car. It's got a 12a they built for him.
Is it ok to premix a little of that with the omp still attached? I did get 2 quarts but have not tried it yet.
Is it ok to premix a little of that with the omp still attached? I did get 2 quarts but have not tried it yet.
#3
Senior Member
Thread Starter
Join Date: Sep 2007
Location: Texas
Posts: 338
Likes: 0
Received 0 Likes
on
0 Posts
Im just blocking off the OMP mop that runs the injector lines.....i bought a whole case of premix so i should be good for a little bit.
Problem is there is a chance that my s4 n/a motor that i just bought has a bad coolant seal.
Im looking for another block...all i need is a bare 13b s4 or s5...it doesnt even need the front cover or oil pan....i need it to swap it into a gsl-se.
Problem is there is a chance that my s4 n/a motor that i just bought has a bad coolant seal.
Im looking for another block...all i need is a bare 13b s4 or s5...it doesnt even need the front cover or oil pan....i need it to swap it into a gsl-se.
Thread
Thread Starter
Forum
Replies
Last Post