Stripped carb => What should be capped and what not
#1
Senior Member
Thread Starter
Join Date: Jul 2003
Location: MN
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
Stripped carb => What should be capped and what not
Hi Bros, I am sure some of your can point out somethings here, I have attached pictures of my stripped carb. Problem I am having here is the car get flooded when it is shut off after it is warmed up. Please advise (I did search and had been following the postings here, but I couldn't make sure where the vent hose is and so is everything else, so I am uploading pictures hoping Rx Wizards can give me better ideas, thanks)
1) picture 1 shows the driver side of the carb, I capped off everything right now, please point out problems.
2) picture 2 shows the passenger side, is the wiring connection correct?
3) picture 3 shows the canister and hoses goes in and out, I am thinking about taking it off, but do not know whether to cap or not, also there is a small metal line right below, what should I do with that.
Thanks!!!
Xiaonan
1) picture 1 shows the driver side of the carb, I capped off everything right now, please point out problems.
2) picture 2 shows the passenger side, is the wiring connection correct?
3) picture 3 shows the canister and hoses goes in and out, I am thinking about taking it off, but do not know whether to cap or not, also there is a small metal line right below, what should I do with that.
Thanks!!!
Xiaonan
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM