1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Still Problems with FUEL

Old Sep 30, 2003 | 12:52 AM
  #1  
ZachstylezRX7's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Jun 2003
Posts: 382
Likes: 0
From: Bellingham, WA
Still Problems with FUEL

Okay... some of you may have known that i recently have been having problems with my fuel system. Sunday i got a new filter and bought an MSD electric fuel pump. I installed both and the car is running the exact same... i have to pump the gas when i am parked on an uphill and at 110mph i lean out along with in the higher gears at low rpms. Is there anything else? What about the fuel pressure regulator? Please help me!!!

Zachstylez
Reply
Old Sep 30, 2003 | 07:51 AM
  #2  
Rx7carl's Avatar
Airflow is my life
Tenured Member 10 Years
 
Joined: Aug 2002
Posts: 6,736
Likes: 2
From: Orlando, Fl
bump- sorry, I dont know about EFI.
Reply
Old Sep 30, 2003 | 01:20 PM
  #3  
mar3's Avatar
Administrator
Tenured Member: 25 Years
iTrader: (8)
 
Joined: Nov 1998
Posts: 12,974
Likes: 62
From: So. Arlington, TX!!!
bump -- Mallory makes a Comp140EFI pump...now you know what should have been bought...
Reply
Old Oct 1, 2003 | 02:52 AM
  #4  
ZachstylezRX7's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Jun 2003
Posts: 382
Likes: 0
From: Bellingham, WA
lol Thanks for bumpen guys... you guys bump as hard as my sound system HOO HA!
Uh... i guess bump... please help guys

Zachstylez
Reply
Old Oct 1, 2003 | 11:09 AM
  #5  
rhinor61's Avatar
Rotary Enthusiast
Tenured Member 15 Years
 
Joined: Mar 2002
Posts: 822
Likes: 0
From: California
There are fuel pressure settings with and without regulator installed in the factory manual, so I can look them up for you. When is the last time you have your injectors out and cleaned?

John
Reply
Old Oct 1, 2003 | 10:27 PM
  #6  
ZachstylezRX7's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Jun 2003
Posts: 382
Likes: 0
From: Bellingham, WA
Rhinor... i just realized that it could be my injectors. They have never been cleaned in 88k miles. Where can i get them cleaned out at and how much $$?

Zachstylez
Reply
Old Oct 1, 2003 | 10:32 PM
  #7  
coldy13's Avatar
Yeah, shutup kid.
Tenured Member 15 Years
 
Joined: Mar 2002
Posts: 1,686
Likes: 2
From: Columbus, OH
Just throwing another thing out there. You could have a lot of rust in your gas tank, which is clogging the fuel filter very quickly, and causing it to lean out.
Reply
Old Oct 1, 2003 | 11:07 PM
  #8  
ZachstylezRX7's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Jun 2003
Posts: 382
Likes: 0
From: Bellingham, WA
Well that is what i thought too, that my fuel filter was just really old. But my old fuel filter looked fine and when i installed my other one my test drive it felt the same... wouldn't it take a lil while for it to clog?

Zachstylez
Reply
Old Oct 1, 2003 | 11:19 PM
  #9  
coldy13's Avatar
Yeah, shutup kid.
Tenured Member 15 Years
 
Joined: Mar 2002
Posts: 1,686
Likes: 2
From: Columbus, OH
If you're sure that the old filter isn't full of rust, then I would think that it's ok, and the new one isn't clogged. Get a fuel pressure regulator and clean the injectors, if it still is having problems, then I don't really know what to do, I'm a carb guy, don't know much about fuel injection.
Reply
Old Oct 1, 2003 | 11:33 PM
  #10  
ZachstylezRX7's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Jun 2003
Posts: 382
Likes: 0
From: Bellingham, WA
Lol okay... do i have to get the OEM regulator or can i go to Schucks and get one?

Zachstylez
Reply
Old Oct 3, 2003 | 12:41 AM
  #11  
ZachstylezRX7's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Jun 2003
Posts: 382
Likes: 0
From: Bellingham, WA
WTF BUMP!
Can i get a Schucks fuel pressure regulator?
Is it the injectors?
What else could it be?
How much and where to get injectors cleaned and crap?

ALDL!

Zachstylez
Reply
Old Oct 3, 2003 | 02:25 AM
  #12  
ZachstylezRX7's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Jun 2003
Posts: 382
Likes: 0
From: Bellingham, WA
REVIEW!
I need to hold the gas down for the car to start when parked uphill.
Huge delay when i shift gears and floor it.
Lean out at 110mph.
Noticeable loss of power it feels like from my butt dyno.

Could this be TPS? Is there a rich/lean adjuster? ARGH I AM SO FRUSTERATED!!

Zachstylez
Reply
Old Oct 3, 2003 | 10:38 AM
  #13  
ZachstylezRX7's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Jun 2003
Posts: 382
Likes: 0
From: Bellingham, WA
BUMP
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Queppa
New Member RX-7 Technical
11
Nov 18, 2024 03:47 AM
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
stickmantijuana
Microtech
30
Apr 23, 2016 06:37 PM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:56 AM.