Sterling Carb Owners
#1
Suicidal Death Missile
Thread Starter
Join Date: Mar 2004
Location: Newport News, Virginia
Posts: 1,782
Likes: 0
Received 0 Likes
on
0 Posts
Sterling Carb Owners
What fuel pump do you guys use? I've got to order a new pump, and was looking at the carter that summit has, but the 1/4" npt fitting seems a bit small. What pump do you use?
#2
Whack 'em and stack 'em
Join Date: Mar 2003
Location: Clarksburg/Bridgeport WV- North Central Appalachia
Posts: 1,373
Likes: 0
Received 0 Likes
on
0 Posts
Redline Weber pump. Mounts in the stock location nicely with minimal headache. It's also very, very quiet.
http://www.redlineweber.com/SEMA2002...fuel_pumps.htm
990090.131
Standard Pressure high volume 6 PSI 25 GPH (requires a pressure regulator).
For use on engines up to 200Hp .
Inlet fitting ¼” barbed, outlet fitting ¼ barb tube.
This pump will maintain performance with Weber carburetors for all Street Performance and Off road. applications.*
Standard Pressure high volume 6 PSI 25 GPH (requires a pressure regulator).
For use on engines up to 200Hp .
Inlet fitting ¼” barbed, outlet fitting ¼ barb tube.
This pump will maintain performance with Weber carburetors for all Street Performance and Off road. applications.*
Last edited by Tom; 02-25-05 at 08:10 PM.
#4
Whack 'em and stack 'em
Join Date: Mar 2003
Location: Clarksburg/Bridgeport WV- North Central Appalachia
Posts: 1,373
Likes: 0
Received 0 Likes
on
0 Posts
Don't have the receipt handy but I think it was around $100.00.
You can buy brass fittings to reduce/enlarge if need be. My line fit fine on the 1/4" stock barb with no leaks using the supplied hose clamps.
I use a Holley FPR and liquid filled gauge- stays right on the money now.
This is the second Weber pump I've used. The first one was on my old 81 with a SP 13B and a Mikuni. No fuel delivery issues with that set up either.
You can buy brass fittings to reduce/enlarge if need be. My line fit fine on the 1/4" stock barb with no leaks using the supplied hose clamps.
I use a Holley FPR and liquid filled gauge- stays right on the money now.
This is the second Weber pump I've used. The first one was on my old 81 with a SP 13B and a Mikuni. No fuel delivery issues with that set up either.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM