1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

started with a huge cloud of smoke

Thread Tools
 
Search this Thread
 
Old Apr 2, 2004 | 06:25 PM
  #1  
capri93's Avatar
Thread Starter
The thing
Tenured Member 10 Years
 
Joined: Mar 2004
Posts: 388
Likes: 1
From: palmerton pa
started with a huge cloud of smoke

Got the 81 started today idles nice smokes some didn't get to run it long enough to know for sure but it could just be from setting for 2 years i didn't have much fuel so i only ran it for a few seconds. I didnt want to run it to long cuz i don't know if the omp is working. Lastly the water pump or the main hose going to the bottom of the water pump leaks like crazy water fall kinda leakand the alt. is bad, I have one that might fit from my 1.6 mazda motor as a temp replacement.
Reply
Old Apr 2, 2004 | 06:40 PM
  #2  
prefix's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Dec 2003
Posts: 214
Likes: 0
From: Austin, TX
um ok, but why did you post this?
Reply
Old Apr 2, 2004 | 07:19 PM
  #3  
capri93's Avatar
Thread Starter
The thing
Tenured Member 10 Years
 
Joined: Mar 2004
Posts: 388
Likes: 1
From: palmerton pa
For one how hard is it to get the water pump off to check it? Second is there anyother place in there that might also leak.
Reply
Old Apr 2, 2004 | 07:36 PM
  #4  
mazdaverx713b's Avatar
Have RX-7, will restore
Veteran: Army
Tenured Member: 20 Years
Loved
Community Favorite
iTrader: (91)
 
Joined: Oct 2003
Posts: 22,577
Likes: 1,273
From: Ohio
the water pump is pretty simple to check and to get off. do yourself a favor and buy the correct alternator, do not use one from another car. you don't want to fry your electrical system you have to run the engine in order to check the omp, so therre you have it. its prob the wp that is leaking. the gasket probably rotted and hardened. got any pics? good luck with the car!
Reply
Old Apr 2, 2004 | 07:41 PM
  #5  
capri93's Avatar
Thread Starter
The thing
Tenured Member 10 Years
 
Joined: Mar 2004
Posts: 388
Likes: 1
From: palmerton pa
Thanks, is that gasket between the pump and the motor? As for the alt as long as the voltages are the same it shouldn't matter should it? Dont have any pics, got layed off befor i got the money to gether to buy a digital cam.
Reply
Old Apr 2, 2004 | 07:44 PM
  #6  
mazdaverx713b's Avatar
Have RX-7, will restore
Veteran: Army
Tenured Member: 20 Years
Loved
Community Favorite
iTrader: (91)
 
Joined: Oct 2003
Posts: 22,577
Likes: 1,273
From: Ohio
there is a gasket and when you replace it, make sure you use a sealer. it prob won't matter on the voltagers but the pulley may be different and the bracket may not line up. remember, if you pull it, there is a spacer for the alt. bracket. do not lose that!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
5
Sep 12, 2015 12:22 PM
whinin
New Member RX-7 Technical
10
Sep 5, 2015 11:52 PM
rx7shirley
2nd Generation Specific (1986-1992)
6
Sep 2, 2015 02:11 PM




All times are GMT -5. The time now is 02:02 PM.