Stalling in deceleration
#1
Newbie
Thread Starter
Join Date: Nov 2007
Location: Saskatoon, Saskatchewan
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Stalling in deceleration
My son and I have just acquired an 84 GSL (12a). It is stalling in deceleration and I realize it must be a problem with the anti-afterburn solenoid valve or the coasting valve. Any tips on resolving this problem?
#2
Newbie
Thread Starter
Join Date: Nov 2007
Location: Saskatoon, Saskatchewan
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Re-post: Stalling in deceleration
My son and I have just acquired an 84 GSL (12a). It is stalling in deceleration and I realize it must be a problem with the anti-afterburn solenoid valve or the coasting valve. Any tips on resolving this problem?
#3
7-less
Join Date: Dec 2005
Location: No. Virginia, USA
Posts: 2,053
Likes: 0
Received 0 Likes
on
0 Posts
Replace the AAV/ACV assembly. Mazdatrix sells them, but they are PRICEY.
http://www.mazdatrix.com/b-egr.htm
Also, welcome to the Darkside. Check the FSM for your car, it'll help.
http://www.wankel.net/~krwright/cars/rx7/manuals.html
Also, please be sure to use the Search function. You'll be able to find some helpful info there, too.
http://www.mazdatrix.com/b-egr.htm
Also, welcome to the Darkside. Check the FSM for your car, it'll help.
http://www.wankel.net/~krwright/cars/rx7/manuals.html
Also, please be sure to use the Search function. You'll be able to find some helpful info there, too.
#4
Newbie
Thread Starter
Join Date: Nov 2007
Location: Saskatoon, Saskatchewan
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, I did try a search but didn't come out with anything as useful as your reply. I have a Haynes repair manual, replacement is never suggested but it is implied. I'll follow-up on your suggestions.
#5
7-less
Join Date: Dec 2005
Location: No. Virginia, USA
Posts: 2,053
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, you're not the only one who's encountering that problem.
I'm getting a bit of a shudder during deceleration. I replaced the gasket around my AAV/ACV assembly, but that's because I previously took it off and the original gasket torn.
I'm getting a bit of a shudder during deceleration. I replaced the gasket around my AAV/ACV assembly, but that's because I previously took it off and the original gasket torn.
Thread
Thread Starter
Forum
Replies
Last Post
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
03-20-18 01:54 PM
REX7&Z32TT
New Member RX-7 Technical
5
09-09-15 05:16 AM