Soon to be another '7' on the road again.
#37
Zoom Zoom
iTrader: (1)
Join Date: Jun 2008
Location: Minnesota
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
Save yourself the headache.
http://www.bigcustomwheels.com/rt_specs.jsp
Now you'll know exactly what your speedo is at.
http://www.bigcustomwheels.com/rt_specs.jsp
Now you'll know exactly what your speedo is at.
#40
Rotary Noob
Join Date: Jul 2008
Location: Oahu, HI. where my shippin cost is more than yours unfortunatley...
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Awesome project fb!! So I take this is going to be a drift machine?? if so, cant wait to see it in action!! Great job MENG!!
#41
1st-Class Engine Janitor
iTrader: (15)
The wheel wells are not square in cross-section, they're rounded off. A wider tire of the same diameter will rub, too... particularly in front, where they have to pivot to turn the car.
#44
The stock tires are also only 70-series, with an overall width of only about 7.25 inches... have you considered the width of your new rims/tires, and how that will impact fitment?
The wheel wells are not square in cross-section, they're rounded off. A wider tire of the same diameter will rub, too... particularly in front, where they have to pivot to turn the car.
The wheel wells are not square in cross-section, they're rounded off. A wider tire of the same diameter will rub, too... particularly in front, where they have to pivot to turn the car.
And i am not doing that swap anymore. I was going to make this a drift car but i am just going to use the Turbo II insted.