Someone is offering 1st gen guage pods :)
#1
Someone is offering 1st gen guage pods :)
http://www.egauges.com/vdo_acce.asp?Subgroup=Mazda_RX-7
HOLY ****!
Kinda expensive but its for the one that started it all!!!
I smell rip off on the price considering the 2ng gen is 15 cheaper, but anwyas they got em
HOLY ****!
Kinda expensive but its for the one that started it all!!!
I smell rip off on the price considering the 2ng gen is 15 cheaper, but anwyas they got em
Last edited by MIKE-P-28; 07-11-02 at 06:57 PM.
#6
I can has a Hemi? Yes...
iTrader: (2)
Sorry to burst your bubble guys. We have gone over this before.
https://www.rx7club.com/forum/showth...&highlight=VDO
https://www.rx7club.com/forum/showth...&highlight=VDO
EGauges does NOT have them in stock. VDO was bought by another company and it has been over a year that the FB pods are in stock.
I had previously placed my order, and they emailed me back cancelling it earlier this year.
BTW, TODAY I molded the Autometer Dual FC pod in today with a heat gun. Grand Total of 2 minutes. Just FYI.
back on June 1, I posted...
https://www.rx7club.com/forum/showth...&highlight=VDO
https://www.rx7club.com/forum/showth...&highlight=VDO
EGauges does NOT have them in stock. VDO was bought by another company and it has been over a year that the FB pods are in stock.
I had previously placed my order, and they emailed me back cancelling it earlier this year.
BTW, TODAY I molded the Autometer Dual FC pod in today with a heat gun. Grand Total of 2 minutes. Just FYI.
back on June 1, I posted...
Originally posted by Directfreak
I ordered it from Egauges.com. Then a few days later they replied that VDO has them back ordered and it has been months.
2 days ago, I called to see if they were back in stock but no luck. Turns out VDO was bought out by another company, and everything has gone to hell.
Autometer makes them for the 2nd Gen. I have a 2nd Gen one and it *almost* fits perfectly, but I will have to take a heat gun to it to make it fit right.
Jimmy54 on the forum has an Autometer one from a CRX, but I don't know how much modification that was. In other words I don't know if it required more or less modifications than an FC Pod.
If you run across a better solution, let me know.
I ordered it from Egauges.com. Then a few days later they replied that VDO has them back ordered and it has been months.
2 days ago, I called to see if they were back in stock but no luck. Turns out VDO was bought out by another company, and everything has gone to hell.
Autometer makes them for the 2nd Gen. I have a 2nd Gen one and it *almost* fits perfectly, but I will have to take a heat gun to it to make it fit right.
Jimmy54 on the forum has an Autometer one from a CRX, but I don't know how much modification that was. In other words I don't know if it required more or less modifications than an FC Pod.
If you run across a better solution, let me know.
Trending Topics
#8
i got one im my car, it alright and does the job but the angle the gauges are set at isnt at all toward where the drive is looking. at first i thought it was for another car, i also had to grind down a bunch of the material on the outside part of it. hope this pic shows up
#9
Originally posted by '95 Mark VIII
ya goofball... The one that is $27 is a single guage pod. The 1st gen one is a dual pod. the 2nd gen dual was $36. Still $6 cheaper, but not as bad as ya thought.
Me<---working out the logistics for my trip to Owensboro in the near future.
Later
ya goofball... The one that is $27 is a single guage pod. The 1st gen one is a dual pod. the 2nd gen dual was $36. Still $6 cheaper, but not as bad as ya thought.
Me<---working out the logistics for my trip to Owensboro in the near future.
Later
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM