Some questions on my TII swap
#1
Banned. I got OWNED!!!
Thread Starter
Join Date: Mar 2002
Location: Las Vegas, NV
Posts: 4,236
Likes: 0
Received 0 Likes
on
0 Posts
Some questions on my TII swap
I'm done gathering all my parts except a turbo. One question is what are people running for exhaust? Don't want it to loud.. was thinking RB 3" downpipe them pre-silencer to a muffler (not chosen yet). also going to run a gt35r. my manifold had a tial 38mm eastegate flange on it. will a tial 38mm work good with the gt35r? Thanks
#2
I can has a Hemi? Yes...
iTrader: (2)
Originally Posted by gonzz
I'm done gathering all my parts except a turbo. One question is what are people running for exhaust? Don't want it to loud.. was thinking RB 3" downpipe them pre-silencer to a muffler (not chosen yet). also going to run a gt35r. my manifold had a tial 38mm eastegate flange on it. will a tial 38mm work good with the gt35r? Thanks
Since you are using an aftermarket manifold, you're going to need a
custom downpipe. If you don't need a catalytic converter, then run
two mufflers. One in the center, one in the rear.
A 38mm wategate may work - but it may creep boost. It depends on
how you fab the wastegate opening, etc.
The bigger the wastegate, the better and more stable your boost will be, without fear of creeping boost.
HTH
Alex R
#3
8/1 Building/Drive Ratio
iTrader: (1)
I run a 3in turbo back exhaust.
3in stainless Magnaflow mufflers
4x7x14 or something in the middle, and a big 3x8x18 with tip in the rear .
I love how its sounds, and its loud, but not excessive.
check out this video of it idling and reving
https://mavdisk.mnsu.edu/creare/imag...rive%20011.avi
3in stainless Magnaflow mufflers
4x7x14 or something in the middle, and a big 3x8x18 with tip in the rear .
I love how its sounds, and its loud, but not excessive.
check out this video of it idling and reving
https://mavdisk.mnsu.edu/creare/imag...rive%20011.avi
Thread
Thread Starter
Forum
Replies
Last Post