Should I install a new carb
Thread Starter
Junior Member
Joined: Feb 2023
Posts: 12
Likes: 0
From: California
Should I install a new carb
So when I bought my rx7 the old owner also gave me a Weber dcoe 45 with everything to put it on the thing is I'm not sure if it would even run if I put on since the car is stock other than the msd ignition system thank you in advance for any help
It should work even with a stock port, but if the Weber hasn't been used with this engine before it'll need to be tuned to it. That means buying different jets, emulsion tubes, venturis, etc. and that all can add up.
If your car is completely stock I'd suggest leaving it be, especially if you need to pass California's inspection.
If your car is completely stock I'd suggest leaving it be, especially if you need to pass California's inspection.
Thread Starter
Junior Member
Joined: Feb 2023
Posts: 12
Likes: 0
From: California
It should work even with a stock port, but if the Weber hasn't been used with this engine before it'll need to be tuned to it. That means buying different jets, emulsion tubes, venturis, etc. and that all can add up.
If your car is completely stock I'd suggest leaving it be, especially if you need to pass California's inspection.
If your car is completely stock I'd suggest leaving it be, especially if you need to pass California's inspection.
Last edited by Crabjuice67; Jun 5, 2024 at 12:37 AM.
Thread
Thread Starter
Forum
Replies
Last Post
scotty230
1st Generation Specific (1979-1985)
30
Sep 4, 2012 11:06 AM
oblivion2k
New Member RX-7 Technical
9
Dec 14, 2010 06:21 PM
thelittlefatmailman
1st Generation Specific (1979-1985)
14
Aug 17, 2006 11:40 PM