Shifting troubles in one gear
Shifting troubles in one gear
Ok i am beside myself on this i have a 82 rx 7 and it is hard to downshift from 4th to 3rd i cannot tell if clutch fuid is full as it is not visible and has a cover under its cap ..... would appreciate any help on this ..plus another problem i have is going into reverse sometimes i have no problem sometimes i have to grind it in .
Thanks in advance for any input.
Cameron
Thanks in advance for any input.
Cameron
Originally Posted by Mazda_Man
Ok i am beside myself on this i have a 82 rx 7 and it is hard to downshift from 4th to 3rd i cannot tell if clutch fuid is full as it is not visible and has a cover under its cap ..... would appreciate any help on this ..plus another problem i have is going into reverse sometimes i have no problem sometimes i have to grind it in .
Thanks in advance for any input.
Cameron
Thanks in advance for any input.
Cameron
The clutch reservoir is clearly visable. If it is dark in color, change it. Just unscrew the lid and look at it. Try bleeding the clutch first. Then, if that does not work, you may need a slave/ or master cylinder. You can buy them new, or purchse rebuild kits from Mazdatrix.
Ok well i bled the lines and it helped out but now having another problem ...... i suddenly lost some power thru hills ( 15 mph) and am having some backfire i switched the plug wires around and that helped some but it still does it not as bad though.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
REX7&Z32TT
New Member RX-7 Technical
5
Sep 9, 2015 05:16 AM



