seized brake piston 81 GS
#1
Full Member
Thread Starter
iTrader: (2)
Join Date: Jun 2009
Location: Pickering, Ontario
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
seized brake piston 81 GS
hey im over hauling the brakes the car had been sitting before i bought it the driver side didnt move and was seized the passenger side would push out as i pushed on the brake pedal i took the calipers off and compressed the pistons back in the seized one went back in as well i reinstalled them and bled the brakes i push on the pedal and the pistons dont move even the one that worked prior to uninstallation do i need to bleed the rears as well is there any other tricks i can try or do i need new calipers
#2
Old Fart Young at Heart
iTrader: (6)
Once the brake system is exposed to air, all of it needs bled. If the pistons/wheel cylinders were sticking/stuck before you started, don't expect them to be freed up after 1 cycle of unsticking them. Since the brakes are a critical operating component, it pays to err on the side of caution and rebuild them instead of hoping they work when needed.
Thread
Thread Starter
Forum
Replies
Last Post
Tem120
3rd Generation Specific (1993-2002)
4
09-07-15 09:53 AM