1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Secondary throttle butterflys wont open

Thread Tools
 
Search this Thread
 
Old Oct 10, 2009 | 06:10 PM
  #1  
ThatIrishGuy's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Jul 2009
Posts: 37
Likes: 0
From: Greensboro, NC
Secondary throttle butterflys wont open

Has anyone else had this problem before? specifically on a 1980
Reply
Old Oct 10, 2009 | 08:36 PM
  #2  
mattreeve's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Sep 2003
Posts: 268
Likes: 0
From: Richmond, B.C
Check For vac leaks on you manifold and carb, and try cleaning the carb could be gummed up.

how long has it been sitting?
Reply
Old Oct 10, 2009 | 08:58 PM
  #3  
Maguire's Avatar
Born 2 Brap
Tenured Member 20 Years
iTrader: (1)
 
Joined: Jun 2002
Posts: 1,068
Likes: 3
From: Louisville, Ky
the vacuum diaphragm on the carb is probably worn out. I would recommend tying together the linkages to convert to manual secondaries. It's a lot easier than it sounds. here's a link https://www.rx7club.com/forum/showpo...6&postcount=11
Reply
Old Oct 11, 2009 | 05:26 PM
  #4  
ThatIrishGuy's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Jul 2009
Posts: 37
Likes: 0
From: Greensboro, NC
thanks Maguire that helped alot
Reply
Old Oct 11, 2009 | 08:41 PM
  #5  
Maguire's Avatar
Born 2 Brap
Tenured Member 20 Years
iTrader: (1)
 
Joined: Jun 2002
Posts: 1,068
Likes: 3
From: Louisville, Ky
No prob! welcome to the forum!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
doritoloco
New Member RX-7 Technical
7
Sep 5, 2015 12:41 PM




All times are GMT -5. The time now is 08:17 PM.