is seam normal?
#1
acdelco d1906 Nkg 49034
Thread Starter
is seam normal?
just before driver's side trailing arm mount. the car was in a firey wreck before I bought it. I was doing the yearly underbody undercoat rust inspection. Scrapped all the rust that I could. Did paint primer. Then found out that I had some rust-reformer spray. Gonna let the primer dry 1 hr, humid as can be right now. Then hit it with enamel rustoleum paint. Then undercoat.
And some areas were bar metal under the undercoating. They should be red. Or did the undercoating rip off the red paint when it was delaminating ?
Note the Polish creeper (cardboard)
And some areas were bar metal under the undercoating. They should be red. Or did the undercoating rip off the red paint when it was delaminating ?
Note the Polish creeper (cardboard)
#3
acdelco d1906 Nkg 49034
Thread Starter
it's saturday, usually there is just one temp in the office that just wants to sit on her butt. So is that OEM where the 2 metals over lap ?
Thread
Thread Starter
Forum
Replies
Last Post
jbherri2
1st Generation Specific (1979-1985)
17
10-08-20 10:42 PM