i just pulled my motor today went well took all of 2 hours that includes labeling all of the plugs and connectors. when i got it out i noticed that the front or right side however you look at it on the lower intake manifold has like a flap to turn? and the other side doesnt is this an issue or do you guys not even know what i am talking about?

 

Perhaps the 5th and 6th ports? I would expect them to both either be in or have been removed. I don't know why there would only be one.

 

Need pictures

 

The real question is, Do you know what you are talking about?

Post a picture but it sounds like you are referring to the 5th 6th port actuators. If you have a Haynes manual or have downloaded a copy of your year FSM then that's all you have to do is go to the proper section and you will know what you are looking at. If you do not have a Haynes manual or have not downloaded a copy of the FSM then I recommend you do so.

 

Flap = Cylindrical sleeve? Is that what you mean?

If it is then the other one may still be in the 6th port of the engine on the opposite side.

^^^^ pics would make it much easier. Definitely get yourself a FSM.