immanuel__7

iTrader: (8)

ok so im just about done my 13BTII S5 in my 86 Gs, 12A, im looking at getting my drive shaft done as son as i get some extra $$, i cant remember who built did a swap like this and had a link to a person that could do a drive shaft all i hade to do was call him with a measurement from trany to diff and tell him what front and rear yoke where, and he could fab one for around 250$ uSD, i searched but i could not find who got this good deal. thanks in advance for your help guys

Breadfan

http://www.thrashdriveshaft.com/

I had a aluminum 3inch drive shaft made w/ 1ton chevy u-joints made by them. Just told them what trans and diff i was running, they had the specs already. I wanna say it was around 250-300 shipped. I had to trim the u-joint bosses to clear the body, but has worked great so far.

immanuel__7

iTrader: (8)

cool thanks il give them a call

renns

I went with these guys:

Pat's Driveline
3 1235 Shawson Dr
Malton, ON L4W
(905) 564-3155

They are in the Dixie/401 area. As I recall the price was around $400 Cdn. I brought them my old shaft and the yoke from a TII, along with the overall dimensions. It was done in about 3 hrs. What really impressed me was the fact that I had not mentioned the make/model information, and the guy behind the counter correctly identified the parts as being from Mazda rotaries.

steve84GS TII

I just used a local driveline shop.
About 175 bucks,with Mustang sized,greasable/replaceable Ujoints. Its nothing really custom,since you are still using OEM drivetrain parts(tranny/rearend)

immanuel__7

iTrader: (8)

local guys want something like 700$ they asked me is this for an import i was like.... well ya it is, so ya, i did find a shop i think its called pets drive line in missisaga for around 350$Can the guy said he would fab me one with chev u-joints, im still looking ,, i have yet to call the first place, il do that tomorrow. thanks for the in put guys

immanuel__7

iTrader: (8)

well as it turns out pats has a shop in missisaga, ontario and i called for a second time and the guys used to own rx7s and he says they have done this kind of drive shaft many time, its a good feeling when they start asking what your future plans are and when they tell you the drive shaft will hold slicks

renns

Did you not read my post?

immanuel__7

iTrader: (8)

lol i know, i did not notice i called the same guys till after
and as it turns out my drive shaft project is now held off an other month. on my way to class today the #2 valve burn up (not to self don't buy cheap oil) so i need a new engine, i wont to wont of my work places, and my boss sold me a 96 jetta 2.0L for 180H worth of laborer and of course the government wants $$ to so my drive shaft money i saved up gos for taxes